.41 mag throating reamer rental

[cmillard]

for those of you out there that like to do some revolver massaging yourself, I was able to get a manson .41 mag cylinder throat reamer and bushing kit sent to me after a long time on back order. I will be doing a before and after grouping session. I successfully used the .45 colt reamer in my bisley and will do the same for my accusport .41 that has VERY tight throats. for anyone wanting to rent this after I use it, I will be more than willing to do so. rental will be for $15 plus $5 shipping one way. you will have to pay for shipping to get it back to me. I will repost after done throating my cylinder. send me a pm if interested. thanks

 

[akajun]

Throating works very well, while I did not see any significant accuracy improvement on any gun I've done it on, I have noticed an elimination of leading. The trick is to get the throats larger than the bore, but not overly large where you can't size your bullets to fit.
When I did my 41 mag Blackhawk , I used a .411 chucking reamer I had as Manson quoted me a year wait time.

 

[cmillard]

my biggest improvement was on my .45 colt bisley. was shooting 4-5 inch cast bullet groups and about 2.5 inch jacketed groups at 25 yards. after throating, the cast bullet loads shoot into 2 inches and the jacketed--speer deep curl (.454) with h-110 shoots a tiny little 5 shot group of under an inch at 25. still working on the .41 mag--it has reduced the groups significantly but I have a little threat choke

 

[cmillard]

btt

 

[cmillard]

btt

 

[cmillard]

btt