SOLD 40x rimfire extractor spring

[FatHorns]

I was dinking around with the extractor on a recently acquired PT&G action. It's a right bolt left port job, and they didn't put the extractor on the correct side. While removing it, the spring took off like a rocket and disappeared. I've got all the rest of the components intact, the plunger and extractor itself. I know the PT&G quality and service has fallen off the table in the last number of years but I'm gonna try and make this work. Does anyone know of a place that sells a replacement or similar spring? PT&G wants to sell me the whole kit for $70. I only need the 1 spring, I believe it's part number 15753.

Any help would be appreciated.

 

[68Hoyt]

Pm sent

 

[Daddycaddie67]

I just bought two sets of trigger pins, sear springs and ejector springs from Numerach. The shipping was more than the parts.

 

[FatHorns]

This is a great community with fantastic support and information.
Thanks to all who have reached out. I've sourced a couple of springs and consider this done.

Dave

 

[Westex]

Outback gun parts and get a heavier spring and cut it . The springs are a little to light on PTG

 

[FatHorns]

Do you know what size spring to order from them? I've read of some folks milling out the hole and using a slightly larger spring for the same reason. I don't have those tools or skill set. I don't mind tinkering a bit and cutting a spring.

 

[Westex]

I called outback gun parts and asked him to send me some springs and I would pick out the correct dia of spring with a little heavier coil and cut it . I cant remember conversation exactly but he kinda knew what I was looking for and was very helpful

 

[FatHorns]

Thanks for that. I'll reach out to them tomorrow.