3d printed Barrel tenon protectors and muzzle end

[806guns]

Looking to see if there is any interest in barrel tenon thread protectors and muzzle end? Current model has closed ends. Can change to different threads as well.

 

[GenePoole]

I made a bunch of these for different tenons a while back. They got very little interest. I ended up just using them internally for spares.

 

[eric32]

Can you make some to seal up muzzles to be able to pour solutions in barrels. And let them sit over night.

And along with suppressor to allow cleaning

 

[806guns]

Can you make some to seal up muzzles to be able to pour solutions in barrels. And let them sit over night.

And along with suppressor to allow cleaning

I can see if they make a filament that can withstand chemicals.
Also o ring fit would probably be the best for a good seal.

 

[newbieshooter]

rifle barrel tenon covers — F Class John

rifle barrel tenon thread protector covers to prevent damage

goose-decagon-z2ma.squarespace.com

 

[806guns]

rifle barrel tenon covers — F Class John

rifle barrel tenon thread protector covers to prevent damage

goose-decagon-z2ma.squarespace.com

Mine will be at a slighty lower cost.

 

[newbieshooter]

Mine will be at a slighty lower cost.

Will yours also ship for free?

 

[ballisticdaddy]

If you use PETG it is resistant to most chemicals and is also impact resistant. If you print using PLA and drop or hit it hard on anything it will crack and break as it is very brittle.

 

[806guns]

Will yours also ship for free?

Sure will if you buy more than one or two.

 

[whatwind?]

What about a crown protector or guide that could slide on or screw on?

Or an open part for cleaning solution to be applied on the barrel off cleaning attachment

Combined these two things

 

[R&B]

I would be interested in any thread protector or muzzle cap.

-R&B

 

[806guns]

After a screw up with taps. I should have most done and packaged up tonight.

 

[806guns]

Bump

 

[Strap]

Hey boss
got some prices or you need a pm?

 

[806guns]

New pricing is $15 per set $5 per extra