.336 no turn neck for 30br

[plumbkrazy]

Hello everyone I'm new on here and just getting started in the benchrest game I'm looking to have a 30br built the smith I'm using has a .336 reamer for a no turn neck is this good or should I go another way I have no idea. Thanks for any in put

 

[bozo699]

Plunbkrazy,
There is a complete write up on the 30br on the home page of this site.
Welcome to the forum.
Wayne.

 

[tiny68]

I have 0.330, 0.332, and 0.333 neck 30BRs. My next will also be a 0.330 for the reasons mentioned by RB. 0.332 works ok. My 0.333 didn't always clean the brass up as good as I wanted. Luck, Tim

 

[plumbkrazy]

Thanks guys as I saided I'm new and didn't want to go wrong The smith has one and swares by it thank I'll look some more

 

[Eddie Harren]

I had my 30BR reamer ground with a .331 nk because my 308 and my 30x47 were already .331. I never have to adjust or, reset my neck turner. Necks clean up fine at this dimension.

 

[tiny68]

I had my 30BR reamer ground with a .331 nk because my 308 and my 30x47 were already .331. I never have to adjust or, reset my neck turner. Necks clean up fine at this dimension.

Now that's thinkin.......... ;D I have choose to buy separate K&M turners instead of having to adjust them for my 6s and 30s. Tim

 

[bozo699]

I had my 30BR reamer ground with a .331 nk because my 308 and my 30x47 were already .331. I never have to adjust or, reset my neck turner. Necks clean up fine at this dimension.
[/quote]

Now that's thinkin.......... ;D I have choose to buy separate K&M turners instead of having to adjust them for my 6s and 30s. Tim
[/quote]

Now that is thinking. That is why I frequent this site your always learning somthing!
With high cost and time consuming prep work, every little thing can be a big plus.Good job DocEd and thanks.
Wayne.