• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

308 Reamer w/175 Sierra

What freebore should I be looking for in a reamer for a 308 using Sierra 175 MK? I'm not looking for a tight neck or min. body dimensions just something that will allow me to chase the throat a bit.

Longone
 
I have a .340" and a .344" neck diameter both have .090" freebore which I`m told is perfect for the 175 MK. I took an inch off my last barrel, and made a bump/headspce gauge which was able to see the 155 Lapua Scenar is also seated very nice at this freebore due its length. The Palma reamers will usually have a .050" freebore for the lighter 155 class with the shorter bearing surface than the Scenar.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,327
Messages
2,216,702
Members
79,554
Latest member
GerSteve
Back
Top