• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

.308 loads with 169 SMK

I'm running them in my M14. I cleaned a 600 yard target last week and shot 1.2 MOA at 600 yards for 11 shots. 100-6X, 110-7X if you count the sighter. I shot six X's in a row before the wind blew me out of the X-ring and into the 10-ring. I managed to hold left and bring it back into the X-ring.

EofpZRn.png


ejqupzJ.jpeg


I'm running 42.6 grains of IMR-4064 with Remington 9-1/2 primers and military brass. Muzzle velocity out of a 22" barrel was 2630 FPS. The target indicates a SD of 12. You'll have to play with your seating depth according to your chamber print. I'm running a match chamber and I'm running longer than mag length. It's over 2.850".

Since the vintage sniper match I shoot in is single-feed only, I'm able to get away with running a longer than mag length load.

Here's a 300 yard target with a 15 MPH wind.
gkdztAo.png


300 yard target.
OmkYS0H.jpeg


Tony.
 
Last edited:
They have been shooting well at 2630-2640 fps in my new to me M1A with N135. My biggest issue is holding elevation at 600 yards with a sight post and 63 year old eyes. That and remembering the knob directions are backwards from my Warners. :)
 

Attachments

  • Screenshot_20250320-182441 (1).png
    Screenshot_20250320-182441 (1).png
    361.2 KB · Views: 10
Last edited:
I'm running them in my M14. I cleaned a 600 yard target last week and shot 1.2 MOA at 600 yards for 11 shots. 100-6X, 110-7X if you count the sighter. I shot six X's in a row before the wind blew me out of the X-ring and into the 10-ring. I managed to hold left and bring it back into the X-ring.

EofpZRn.png


ejqupzJ.jpeg


I'm running 42.6 grains of IMR-4064 with Remington 9-1/2 primers and military brass. Muzzle velocity out of a 22" barrel was 2630 FPS. The target indicates a SD of 12. You'll have to play with your seating depth according to your chamber print. I'm running a match chamber and I'm running longer than mag length. It's over 2.850".

Since the vintage sniper match I shoot in is single-feed only, I'm able to get away with running a longer than mag length load.

Here's a 300 yard target with a 15 MPH wind.
gkdztAo.png


300 yard target.
OmkYS0H.jpeg


Tony.
Tell us about that rifle
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,261
Messages
2,192,335
Members
78,785
Latest member
Vyrinn
Back
Top