30-06 Best powder, of the not recommended powders

[Dimner]

I have a 30-06 build that I need to start load development for.
The barrel is a standard Saami 30-06 chamber, 1:11 twist, 24".
My goal is at least 1 moa to 350 yards.
The bullets are Hornady 150gr Interlock SP (Flat Base)

Once my powder is chosen, I will follow the process outlined in https://forum.accurateshooter.com/threads/long-range-load-development-at-100-yards.3814361/

It's a tikka rifle, so let's assume 1moa is feasible.

With the problem with powder shortages, and extremely high cost, I have to use what powder I have on hand. In a perfect world, I would goto H/IMR 4350 and start there. Or maybe something reloader 16-19. However, I have to stick with what I have. Which means it's a bit confusing for me to try to pick from the following powders.

1moa is my goal. The fastest velocity is a secondary consideration.

IMR3031
H4895
Benchmark
Shooter's World Match Rifle (a spherical powder similar burn rate as RL15)
Shooter's World Precision (a Varget substitute)
Ramshot Hunter (I am hesitant to use, I have never been able to get this powder to shoot well (270 and 6.5x55)

With these kind of constraints which do you think I should start with? Or is there a test I can run (before the load development described in the link above) that will give me information that I can use to make a choice? I would really rather not waste a ton of bullets with a pre-test if at all possible.

 

[HTSmith]

Your curse will turn out to be a blessing. Load up with H4895 and have fun. You've also chosen a good deer bullet in my experience.

 

[Toptom]

My family uses a lot of 30-06 every year including myself and also that exact bullet. The hornady interlock 150 has killed tons of deer a few bear and a few elk for us, just a good old design. As far as the powders you have I agree with last post the 4895 would be probably best choice with your list but our stand by was always 4064 with the 150s. Have fun with the new rifle!

 

[mac86951]

I have a 30-06 build that I need to start load development for.
The barrel is a standard Saami 30-06 chamber, 1:11 twist, 24".
My goal is at least 1 moa to 350 yards.
The bullets are Hornady 150gr Interlock SP (Flat Base)

Once my powder is chosen, I will follow the process outlined in https://forum.accurateshooter.com/threads/long-range-load-development-at-100-yards.3814361/

It's a tikka rifle, so let's assume 1moa is feasible.

With the problem with powder shortages, and extremely high cost, I have to use what powder I have on hand. In a perfect world, I would goto H/IMR 4350 and start there. Or maybe something reloader 16-19. However, I have to stick with what I have. Which means it's a bit confusing for me to try to pick from the following powders.

1moa is my goal. The fastest velocity is a secondary consideration.

IMR3031
H4895
Benchmark
Shooter's World Match Rifle (a spherical powder similar burn rate as RL15)
Shooter's World Precision (a Varget substitute)
Ramshot Hunter (I am hesitant to use, I have never been able to get this powder to shoot well (270 and 6.5x55)

With these kind of constraints which do you think I should start with? Or is there a test I can run (before the load development described in the link above) that will give me information that I can use to make a choice? I would really rather not waste a ton of bullets with a pre-test if at all possible.

Yes H4895, followed by 3031 will do just fine.

The others may work, though as you've suggested they maybe more tedious to work up a load for.

3031 you'll want a winter and a summer load. H4895, you should be able to make one that works all seasons.

-Mac

 

[RegionRat]

H4895 will do.

 

[miningshawn]

Don't forget Winchester powders, that have shown up on my local shelves more than any other recently. 760 and StaBall6.5 work well with lighter 30-06.

 

[Pawnee Bill]

Your curse will turn out to be a blessing. Load up with H4895 and have fun. You've also chosen a good deer bullet in my experience.

H4895 is your friend.

 

[DGP4]

I'd agree with the rest here that H4895 is your best bet. Shooter's World Precision also works well with 150 grain bullets in my Garand.