WANTED .270 or .271" neck reamer

[rickiesrevenge]

Looking for a .271" neck reamer. .270" would work too. Wanted to ask here before I called Manson on Monday.

Aaron

 

[ELR LVR]

Looking for a .271" neck reamer. .270" would work too. Wanted to ask here before I called Manson on Monday.

Aaron

do you mean a - throating reamer for the free bore??
or just for the neck only?
these are two different OD's as the neck is close to brass dia. and freebore is close to bore/bullet dia.
if neck only, I would think you could simply use a chucking reamer
Ebay would be my first place to look
------------
However, then there may be the fact you will have a sharp angle at the neck shoulder junction
which I dont know of an easy method to radius just the sharp edge of the neck shoulder junction
after enlarging/reaming just the neck area
usually the chamber reamer takes care of that
------------
whatever you choose to do if its a custom reamer, I give a thumbs up for Manson

 

[rickiesrevenge]

Just the neck.