• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

2500x BUILDS

I'm putting together a 2500x is another webb sites that talks about there gun and there builds I almost got all
the parts to get my gun together . just like to see what other shooters are using. and it doesn't hurt to talk .
scope mounts rings triggers scopes you know all stuff ?
 
Alex Wheeler built one and has a thread on here about it in Rimfire forum

And Dave Way just had a nice write up on one he had Alex build for him on main message forum
Wayne
 
Here is a website that Jerry Stiller runs. That sight is pretty bias towards the 2500x
Yes and no regarding the bias. Sure, if you search around there you'll find a lot of info from when Jerry was developing the 2500X (and Trident). There's a lot of discussion around the 2500X because there's a lot of people shooting them. If you look at the equipment list from ARA outdoor nationals last September you'll see that over half of the field was shooting 2500X. There are a lot of people on RA that shoot a Turbo or Turbo clones too
 
Last edited:
If you're still building I have a rail and bore guide for a 2500. We'll work out a good price for them both, new in the box.
 
Yes and no regarding the bias. Sure, if you search around there you'll find a lot of info from when Jerry was developing the 2500X (and Trident). There's a lot of discussion around the 2500X because there's a lot of people shooting them. If you look at the equipment list from ARA outdoor nationals last September you'll see that over half of the field was shooting 2500X. There are a lot of people on RA that shoot a Turbo or Turbo clone too
Didn’t mean anything buy saying bias. Ment that people on the sight just seem to shoot more of them to anything else. Maybe should have used a different word.
 
Didn’t mean anything buy saying bias. Ment that people on the sight just seem to shoot more of them to anything else. Maybe should have used a different word.
Fair enough. I can see how many newer shooters to the site could think that, but the reality is most of us have 3,4,5 comp guns and most have many of the major makes. For transparency, I run the site so I probably have a bit different perspective, but in general if you want the best info available on Rimfire Accuracy, you won't find better info than on RA. Most of what you see on other sites has all originated in some form from RA.

There are certainly different disciplines which we may not cater to, but for pure accuracy and detailed info, not a better site out there for Rimfire in my opinion.
 
Last edited:
Fair enough. I can see how many newer shooters to the site could think that, but the reality is most of us have 3,4,5 comp guns and most have many of the major makes. For transparency, I run the site so I probably have a bit different perspective, but in general if you want the best info available on Rimfire Accuracy, you won't find better info than on RA. Most of what you see on other sites has all originated in some form from RA.

There are certainly different disciplines which we may not cater to, but for pure accuracy and detailed info, not a better site out there for Rimfire in my opinion.
Totally agree a lot of good info on RA.
 
And your point. Seems like I can’t comment on anything with out you telling me how new I am thanks for reminding me. I almost forgot
Probably got something to do with asking lot’s of newbie questions then not paying attention to advice given.
P.S. Look up bias, it’s a pejorative.
 
Probably got something to do with asking lot’s of newbie questions then not paying attention to advice given.
P.S. Look up bias, it’s a pejorative.
Ooh ok. You are one of the guys that were born a veteran shooter lol. Honestly not sure what you mean. I always take all the advice I can get from a lot more experienced shooters and really appreciate it.
 
Last edited:
I have to say again and again thank you guys for knowledge. you give me and others .spot on as usual !
I got a Lidgard stock and cone breech that Richard Gorham smithed and a jewell trigger action should be here next week and a start. I know ammo is the most important part . its cold in idaho for a few months
which i don't mind .working on a few projects one is a tool for my lathe so can turn necks inside out same
time like idod .and a one piece rest for ara .old rick
 
I have to say again and again thank you guys for knowledge. you give me and others .spot on as usual !
I got a Lidgard stock and cone breech that Richard Gorham smithed and a jewell trigger action should be here next week and a start. I know ammo is the most important part . its cold in idaho for a few months
which i don't mind .working on a few projects one is a tool for my lathe so can turn necks inside out same
time like idod .and a one piece rest for ara .old rick
Rick,
What part of Idaho are you from?
Wayne
 
I have to say again and again thank you guys for knowledge. you give me and others .spot on as usual !
I got a Lidgard stock and cone breech that Richard Gorham smithed and a jewell trigger action should be here next week and a start. I know ammo is the most important part . its cold in idaho for a few months
which i don't mind .working on a few projects one is a tool for my lathe so can turn necks inside out same
time like idod .and a one piece rest for ara .old rick
Sounds like a good one. My Gorham smithed rifle shoots very well. You will be happy
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,731
Messages
2,201,572
Members
79,067
Latest member
Nonesuch
Back
Top