25 prc 131 H4350

[Lance21]

I've got a 22 inch,7.5 twist 25 prc barrel. I've tried H4831sc and RL26. I can get great velocities with both,3100+,but the accuracy isn't setting the world on fire. Would h4350 be too fast for this setup? Would it pressure up before I got good case fill? Where might I start the powder charge at approximately? 131 gr smk.

 

[Chris kloster]

H1000

 

[GlennK]

N570 works well with 133 berger....might work too.

 

[L.Sherm]

N570 works well with 133 berger....might work too.

Don't remember Glenn was it 7828 you had some luck with in the beginning of your 25 PRC?

 

[GlennK]

Don't remember Glenn was it 7828 you had some luck with in the beginning of your 25 PRC?

Yes..but found it too variable in the Montana temps. Shot h1000 this fall during hunting and then found n570 to be really good over 2 grains of powder at 600.

Took a vibrating toothbrush though to get it in there

 

[Brandon_M]

I found 4350 was too fast, h1000 was better.

 

[Lance21]

I found 4350 was too fast, h1000 was better.

I was thinking it could be too fast,but wanted to see what anybody else thought. It would be nice to run h4350 exclusively through everything.