BigBamBoo
Silver $$ Contributor
Hi gang.
First post here. Recently started reloading. I have a fast twist, 1:7.5 ) 26' barrel .243 Win. and have a bunch of 105 Amax, 107 SMK's, 115 DTAC's,and 115 VLD's.
My brass is Lapua, primers BR-2...and here is the powders I have on hand:
Retumbo
VV N165
RL19
RL-22
IMR-4350
I have been trying to build up a 600 and 1000yrd load. I have been trying with the 107 SMK's with RL-19. I get a VERY consistent flyer with this combo at any load. It will shoot 4 into a .300 or less group at 100yrds. then a flyer. The flyer comes in randomly...not the last shot.
Is this caused by the powder? Should I try the RL-22?
Today I went out and tried some of the Berger 115 VLD's with RL-22. I get awesome groups...shot a .337 and .307 groups at 100yrds....but it seems VERY slow. I am waiting for a chronograph I orderd.
The great groups come in using 42.2gns of RL-22. Book spec says this is about 2790fps. All the post I see on the net says these bullets should be pushed to 2900+ I went to the max charge and the groups opened up and I was getting slight pressure signs,very light shiny extractor marks).
I was thinking about trying some Retumbo to see if that will help get the speed up and maintain a good group.
Any help/input would be great.
Take care
First post here. Recently started reloading. I have a fast twist, 1:7.5 ) 26' barrel .243 Win. and have a bunch of 105 Amax, 107 SMK's, 115 DTAC's,and 115 VLD's.
My brass is Lapua, primers BR-2...and here is the powders I have on hand:
Retumbo
VV N165
RL19
RL-22
IMR-4350
I have been trying to build up a 600 and 1000yrd load. I have been trying with the 107 SMK's with RL-19. I get a VERY consistent flyer with this combo at any load. It will shoot 4 into a .300 or less group at 100yrds. then a flyer. The flyer comes in randomly...not the last shot.
Is this caused by the powder? Should I try the RL-22?
Today I went out and tried some of the Berger 115 VLD's with RL-22. I get awesome groups...shot a .337 and .307 groups at 100yrds....but it seems VERY slow. I am waiting for a chronograph I orderd.
The great groups come in using 42.2gns of RL-22. Book spec says this is about 2790fps. All the post I see on the net says these bullets should be pushed to 2900+ I went to the max charge and the groups opened up and I was getting slight pressure signs,very light shiny extractor marks).
I was thinking about trying some Retumbo to see if that will help get the speed up and maintain a good group.
Any help/input would be great.
Take care