224 valkyrie upper

[wboggs]

I'm looking for member's
experience for a quality complete target upper. Already have lower.
Thanks

 

[Enosiophobia]

Bought one off a fellow member on a statewide site. Can't recall the make of the upper, but it's a Faxon barrel. Once I found the recipe, it shoots quite nicely.

 

[wboggs]

AR-15 Upper Recievers

Dtech ar-15 upper recievers hand made to order by owner-operator Mike Milli.

www.dtechuppers.com

I have a 24" 6.5 twist to shoot he heavies in a Select Match barrel. If I had to do it all over I again I wouldn't change. You can find a lot of information on Mike (Dtech) on Predator Masters forum.

Not sure which lower you have but I put mine on an Aero precision and it fit perfectly.

I have a cmmg

AR-15 Upper Recievers

Dtech ar-15 upper recievers hand made to order by owner-operator Mike Milli.

www.dtechuppers.com

I have a 24" 6.5 twist to shoot he heavies in a Select Match barrel. If I had to do it all over I again I wouldn't change. You can find a lot of information on Mike (Dtech) on Predator Masters forum.

Not sure which lower you have but I put mine on an Aero precision and it fit perfectly.

I have a cmmg but they discontinued the upper

 

[alf]

I have a barrel from Dtech that I built my upper around, and it is an absolute hammer.

I just ordered another from them a couple weeks ago, I'm a fan.

 

[wboggs]

I have a barrel from Dtech that I built my upper around, and it is an absolute hammer.

I just ordered another from them a couple weeks ago, I'm a fan.

I'm happy to hear you like your 224 valkyrie. As you may remember, we corresponded in the 6.5 prc when it first came out and I value your opinion.
Sounds like Dtech is the way to go. I plan to use the heavy 77-90 gr bullets for targets and steel. What powder, brass, primers, bullets are you using?

 

[alf]

I'm happy to hear you like your 224 valkyrie. As you may remember, we corresponded in the 6.5 prc when it first came out and I value your opinion.
Sounds like Dtech is the way to go. I plan to use the heavy 77-90 gr bullets for targets and steel. What powder, brass, primers, bullets are you using?

Hey Bill, yes I remember our PRC conversations.

One correction though, my AR barrel is not a Valkyrie, it's actually Dtech's version of the 6.8 SPC case necked down to 22 with a slight angle change on the shoulder to 30* from 23.

Current load shoots 52 grain Bergers at 3550 in a 20" tube with outstanding accuracy.

Coyotes are in trouble this fall......

 

[jmkasza]

One of my buddies got the Windham Weaponry complete gun. I've shot it a fair amount and worked on load development with him. It likes the 88gr ELD-M and would consistently shoot .75 moa, but that was the only promising load. We tried several other bullets that seemed to double the group size or worse.

.224 Valkyrie

Windham Weaponry .224 Valkyrie SKU: R22FSFSL-224 Caliber: .224 Valkyrie Action: Semi-Automatic, Gas Impingement System Capacity: 5 +1 - Ships with one 5 Round Magazine Safety: Manual Lever with Indicator Markings on Both Sides of Receiver Receiver: Flat Top Type Upper Receiver with...

www.windhamweaponry.com

 

[wboggs]

One of my buddies got the Windham Weaponry complete gun. I've shot it a fair amount and worked on load development with him. It likes the 88gr ELD-M and would consistently shoot .75 moa, but that was the only promising load. We tried several other bullets that seemed to double the group size or worse.

.224 Valkyrie

Windham Weaponry .224 Valkyrie SKU: R22FSFSL-224 Caliber: .224 Valkyrie Action: Semi-Automatic, Gas Impingement System Capacity: 5 +1 - Ships with one 5 Round Magazine Safety: Manual Lever with Indicator Markings on Both Sides of Receiver Receiver: Flat Top Type Upper Receiver with...

www.windhamweaponry.com

Thank you

 

[5spd]

I assembled 2, 224V uppers with stoner 22" barrels, both are accurate, both made for coyotes and 60g to 75g bullets.
The guys I did em for are happy.