WANTED 22 PPC reamer

[Ramblerman]

Preferably live pilot, no turn. But not picky. Thanks!

 

[Larry Koch]

I think JGS reamers has them on sale 95.00

I dont think you can beat that in the used market. https://www.jgsprecision.com/collec...reamers/products/22-ppc-finish-chamber-reamer

Just rechecked and there sold out

 

[Jeff Buchanan]

Those JGS reamers are a steal at $95…but they’re .243” necks requiring turning to .009” for just .001” loaded clearance.

I’ve got a .252” neck and no-turn 22PPC PTG reamers. Both not used much. I’d sell the no-turn for $125 delivered or the .252” for $100 delivered. Both are piloted reamers.

 

[Larry Koch]

Those JGS reamers are a steal at $95…but they’re .243” necks requiring turning to .009” for just .001” loaded clearance.

I’ve got a .252” neck and no-turn 22PPC PTG reamers. Both not used much. I’d sell the no-turn for $125 delivered or the .252” for $100 delivered. Both are piloted reamers.

key word was not picky, plus it goes along with the same logic as the .262 and .263 6ppc nk.. Which has won many of matches and records

 

[Jeff Buchanan]

I agree with you 100%. Hell, I have a 261” neck 6mm PPC reamer as well. But if you’re using something with an ejector I’d go with the thicker neck option.

 

[PA Jeep]

Jeff, I would take either one of your reamers if Ramber doesnt want them both.

 

[Jeff Buchanan]

Jeff, I would take either one of your reamers if Ramber doesnt want them both.

I’d like to keep the no-turn. If he passes on the .252” I’ll let you know. Thanks-Jeff

 

[30EX]

I’d like to keep the no-turn. If he passes on the .252” I’ll let you know. Thanks-Jeff

Is the no turn for Lapua cases

 

[Jeff Buchanan]

Yes