WANTED 22 PPC -0.100" custom sizing die

[Thegotoguytx]

Before I get on the waiting list for a Neil Jones or similar sizing die I figured I would check on here to see if anyone had a 22 Waldog (the 0.100'" version) sizing die suitable for a .243 nk chamber they want to part ways with.

Long shot but I've been surprised on this forum more than once.

 

[David Conder]

I have a Harrell 22 ppc die bushing can cut off

 

[ASbobcat]

This is a great cartridge design, and will really take off if someone starts making commercially available components.
I looked at it, but decided to go a much easier route, and am putting together a 222Rem instead, Same capacity, readily available components, same end result on target.

If you read the history: "Designed to approximate 222 capacity".

 

[ASbobcat]

FYI, I might add that Norma now makes excellent 222Rem brass with a SMALL FLASH HOLE.

 

[Thegotoguytx]

I have a Harrell 22 ppc die bushing can cut off

David, if you could drop me a PM with details. I'm having a Redding 22 PPC die cut off as we speak but I'm interested to hear what you have.

 

[ASbobcat]

David, if you could drop me a PM with details. I'm having a Redding 22 PPC die cut off as we speak but I'm interested to hear what you have.

I had just had a die cut off, so I speak from experience. Be aware that in a tapered rifle die you are reducing the web diameter along with the length. Cutting .100 off length of a PPC die will reduce your web by about .001. Not a problem if you have a tight chamber. But if you are pushing pressures and have a loose chamber, this could lead to over working the brass and premature case head separation.

Just something to think about.