What is the best 22 creedmoor dies to buy and use. I’m looking for a full length sizer that I can control the neck tension. And a competition seating die. Was wondering sense it’s a creedmoor case necked down could I use a 6mm creedmoor full length sized with a 22 cal neck bushing in it and still get proper shoulder bump?
22 creedmoor dies
- Thread starter Kobe
- Start date
47WillysGuy
Gold $$ Contributor
The total case lengths are the same. 1.920 - 1.920 with trim lengths is 1.910.
Head end( primer end) to shoulder area is the same. 1.490.
But shoulder to case neck has a 0.019" difference.
22 CM is 1.670"
6MM CM is 1.651".
You'll most likely have a problem sizing case getting to the correct the shoulder bump.
Check my internet search numbers, do not trust my numbers. Good luck
Head end( primer end) to shoulder area is the same. 1.490.
But shoulder to case neck has a 0.019" difference.
22 CM is 1.670"
6MM CM is 1.651".
You'll most likely have a problem sizing case getting to the correct the shoulder bump.
Check my internet search numbers, do not trust my numbers. Good luck
urbanrifleman
Site $$ Sponsor
This one
theurbanriflemanstore.com
Use a 252 bushing.
LE WILSON 6 CREEDMOOR Full Length Sizing BUSHING Die-FREE SHIP
LE WILSON 6BR Full Length Sizing Die - Interchangeable Bushing
Use a 252 bushing.
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.