SOLD 22 BR Remage barrel / 8 twist / 24 inch / threaded muzzle

[Lefty Trigger]

Barrel is an Xcaliber blank and made by Crown Ridge barrel works in Washington state. This is a "NO turn neck" chamber. Barrel is Remage threads and 5/8-24 muzzle threads. MTU taper with diameter of .950 right behind the muzzle threads. Barrel has exactly 314 rounds fired. Sold rifle and buyer did not want barrel. Asking $300 shipped.

Update:
Correction to original listing: This barrel is a NO turn neck chamber. I got my barrels mixed up. I made a test round with Lapua brass and did not turn the neck, seated a bullet and it dropped right in. This test round would not chamber in my other 22 BR barrel, best I can measure this is a .253-.254 neck?

 

[Lefty Trigger]

Bump with update info.

 

[6and7mm]

Folks will want/need to know if that is chambered for the original Remington spec Rem 22 BR (shorter neck for brass) or for the Rem 22 BR chamber for Lapua and Norma BR brass (longer neck for brass).

 

[Perk]

How did if shoot? What bullets did you use. Perk

 

[wildcat3d]

Folks will want/need to know if that is chambered for the original Remington spec Rem 22 BR (shorter neck for brass) or for the Rem 22 BR chamber for Lapua and Norma BR brass (longer neck for brass).

He states above that "I made a test round with Lapua brass and did not turn the neck, seated a bullet and it dropped right in"

 

[Lefty Trigger]

Barrel sold.