22-250 AI

[Carlos Luna]

I was wondering if anyone had any solutions on what kind of magazine box would allow my 22-250 AI to feed better on my Remington Model 700 short action . I have the bottom floor plate on my rifle .. I had heard that some people use a center feed box made by Wyatt but I was just trying to see what works the best .

 

[GeorgeS3]

What kind of feeding problem are you having?

 

[fredhorace77]

What kind of feeding problem are you having?

+1, A friend of mine had fits with his but personally every 22-250AI I've ever had fed flawlessly out of a remington 700. Only problem I've ever encountered was extraction problems on a savage 22-250AI

 

[GeorgeS3]

It could be as simple as tweaking the lips of the mag box....

 

[Carlos Luna]

just not feeding to smooth into the chamber . I heard using a center feed box improves a smooth feed into the chamber..

 

[GeorgeS3]

Is the round feeding nose up or nose down into the chamber? The mag lips may need adjusting...

 

[John from MN]

Is there a reasonable chamfer on the a$$ end of the chamber itself? An unlikely problem, but one of the easy ones to check.

 

[AckleymanII]

check the position of the spring on the magazine follower. Never seen or heard of this before.

 

[Carlos Luna]

thanks

 

[Carlos Luna]

Thanks