22-243 & 6MM-06 ACKLEY LOADS NEEDED

[OKIE2]

JUST RECIVED BOTH BARRELS AND DIES.
NOW NEED SOME HELP WITH LOAD DATA.

 

[2000yd]

i shoot a 22-6mm...check hodgon manual same as 220 jaybird

my 6mm06imp necks are 269 loaded with turned nks just for safety use 240 weatherby loadings start low work up call the guys @sierra they will give you great info too i shoot a loaded round to fireform after necking down and turning brass accuracy on par with my ppc rifles keeping in mind barrel is 1.450

heavy six stock and old hart #4 action have found the 75 a-max shoots just as good as 105-107 it is an eye ball shooter to 4-500 yds

 

[2000yd]

call lonnie @ hornady another great guy

 

[graymist]

For the 6mm-06AI it is excellent advise on starting with 240 Weatherby data. I did that for a 6mm-06. Results were very satisfying. With the 1-10 twist of my 6mm-06 the 87 grain Vmax turned out the be a great varmint bullet out to 1,000 yards. H4350 is my powder of choice with that bullet. I use H4350 for all bullets up to 87 grains and Reloder 22 for heavier bullets.