21st century neck lathe replacement Washers on Amazon?

[Linko]

Anyone find an inexpensive replacement rubber washer for the 21st century neck lathe?

(Ordering direct is very expensive to ship like $25)

 

[bozo699]

I gave my lathe to a forum member but can’t you measure your old Oring then order? You can buy a whole box from harbor freight for like $10
Wayne

 

[meatbag]

Maybe try looking on McMasterCarr for a similar one

 

[762willdo]

In

 

[hogpatrol]

Horrible Freight has a box with multiple sizes.

https://www.harborfreight.com/search?q=o%20rings

 

[Linko]

It’s a Flat washer, 2mm thick 15mm OD 5.6mm ID

Not a usual washer. I looked at many many on Amazon.

Thought someone here might have done this before.

 

[Shooter13]

Anyone find an inexpensive replacement rubber washer for the 21st century neck lathe?

(Ordering direct is very expensive to ship like $25)

I thin if you use fbook 10 you'll get 10% off, not much but it could help

 

[bozo699]

It’s a Flat washer, 2mm thick 15mm OD 5.6mm ID

Not a usual washer. I looked at many many on Amazon.

Thought someone here might have done this before.

Linko,
I might be wrong but I think it only flattened over time I’m pretty sure when I bought mine it was round. Couldn’t hurt anything to try. Or call John at 21st I haven’t talked to him in years but when he was first starting out he was super to talk to and eager to help
Wayne

 

[jepp2]

I might be wrong but I think it only flattened over time I’m pretty sure when I bought mine it was round.

There are O rings on the screw as it passes through the lathe upright, and a rubber washer on the inside, that will deform if you tighten it too tight.

 

[bozo699]

There are O rings on the screw as it passes through the lathe upright, and a rubber washer on the inside, that will deform if you tighten it too tight.
View attachment 1563349

I sold mine to BeefyT11 a couple years ago and hadn’t used it in several years before that. I actually forgot about those O rings I was actually thinking about the one on the shell holder. But I bet regular O rings would work for all of them
Wayne

 

[Clancy]

Call and talk to him. Shipping will be cheaper. A lot cheaper.

 

[Deleted member fkimble@charter.net]

Those look like they only act as bumper, Should not need to be a critical size.

FRANK

 

[Chaotik]

Size is not critical. I ordered from Amazon and it worked fine. And by the way, John from 21st Century is no longer with the company.... I believe that he sold it to Pete Petros, who also has been helpful if you have issues with one of their products.

https://www.amazon.com/gp/product/B0BD5P17GQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1