SELLING 20VT

[L.Sherm]

Thinning a rifle out of the herd im not buying another safe lol.
Rem 700SA untouched, I believe an older VSSF Rem stock black ivory tip opened up to fit barrel. 12 tw barrel .890 at muzzle im sure it will shoot 39 BK's does the 34 v- nitemares excellent. Factory trigger but its not bad at all.
Fluted nitrided bolt BDL 223 metal chambered by Bob Green approx 12 years ago. Pillar bedded. Has a slight rub mark on left side of stock in pic and one small mark underneath the black tip
I dont know round count but its not got many on it, pic I took of target few days ago first time fired in about 5 years.
Weighed the rifle best I could with scope 12.5 lbs DOES NOT COME WITH SCOPE but will come with rings.
1450.00 plus shipping and ins to your FFL.

 

[MTPaul]

Despite the age, it still looks to be a shooter! What was the target distance and only because some may wonder, what is the ring diameter?

 

[L.Sherm]

Despite the age, it still looks to be a shooter! What was the target distance and only because some may wonder, what is the ring diameter?

Here's an outside measurement, the red dot .is .325 its a solid .3 group im sure the one that's a little higher was the nut behind the trigger, 2 are in the exact same hole.
Its shot with the 34 V- Nightmares at 110 yards

 

[Bowhunter-tw]

Whats the barrel length? And what velocity were you getting?

 

[L.Sherm]

24" barrel straight taper I dont chrono much but from previous 20VT I have 3700FPS give or take.
The load is with AA2200 I will provide loading data and a dummy round for bump and seating depth.

 

[MTPaul]

What is the inside diameter of the rings?

 

[L.Sherm]

What is the inside diameter of the rings?

30mm

 

[jcm24m]

Picture of bolt face please !

 

[20VarTarg]

Can't believe no one has asked. Is this is a single shot or will it feed from the magazine?

 

[L.Sherm]

I run all my Varment stuff single shot, everbody knows the Rem actions dont feed well.

 

[nawahine]

Barrel maker? Threaded?

 

[L.Sherm]

I believe its a X- Cal I made when I worked there. Threaded if you mean at the muzzle no its not threaded.