20MOA -30mm rings for Kelbly Panda

[falconpilot]

I need a little help here..trying to mount my Nightforce on my Panda action. I currently have Davidson rings, but can't get more than 20 moa up with this setup. Anyone know how/where to get a dovetail to dovetail 20moa adpter? I've heard that Kelblys make this tiem, but can't find it on their website..Thanks Jim

 

[d6mmwea]

www.iveyshooting.com Check out the BR 30-50

Going through the same delima also. Here is one option I know of. I don't own one but it looks like a nice unit that will cover multipal MOA corrections and return to zero when short ranging. Maybe some one on here has one and will let us both know how well it works.

 

[brfun]

20 moa tapered rings form d&b supply.
http://scopeusout.com/accessories.htm

 

[Fred Bohl]

I have the Ivy BR30-050 rings on two Stiller Cobra actions and find them to be excellent. For my 6BR with 107 SMK the 100 yard zero is at 4.7 MOA and at 1000 yards is 35.6 MOA. All I need to do is dial in the setting on the Ivy mount for either and can easily switch between them as needed. The calibration of the cam is near perfect when the rings are spaced as specified in the mounting instructions,much closer than most scope adjustments). I prefer to keep the scope centered and use the Ivy mount for those large elevation adjustments.

Note: On my Stiller Cobras, the installed height is 1.77 inch from top of rail on the action,which is the also the top of the dovetail in the mounts) to the center of the scope. Also the 50 MOA = 0.8333 degrees tilt or 0.058 inch lift of rear ring with the prescribed 4.000 inch ring pivot spacing.

 

[TEAMKIESS]

Jim, ckeck your email. I have a 20 moa rail that I bought from Kelbly's a couple of years back I would sell if you are intersted.

Mike

 

[Lbart]

Jim,
Another option is a set of Jerry Stiller rings at http://viperactions.com/

“1 Inch or 30 mm Rings with 20 MOA Offset, Davidson Style” $100

I use them on all my F-Class open rifles with NF BR's. You do have to be careful with for and aft ring spacing.

 

[billmo]

www.iveyshooting.com Check out the BR 30-50

Going through the same delima also. Here is one option I know of. I don't own one but it looks like a nice unit that will cover multipal MOA corrections and return to zero when short ranging. Maybe some one on here has one and will let us both know how well it works.

Guys, I have the 150 rail by Ivey and it works great. Using this rail will allow you to mount your scope in low or medium rings. I would reccomend this product. Bill