.204 chamber brush can't find one

[BobbyJ]

I found a .204 bore brush but can't find a chamber brush. Not really sure how often the chamber needs cleaning.

the .223s would work but the tip of them go into the bore and probably would be too tight. Same with the chamber mops.

What are you guys using?

 

[1raggedhole]

223 chamber brush. 204 chamber behind shoulder is a bit longer than 223. Been using it for years, works fine.

 

[BobbyJ]

223 chamber brush. 204 chamber behind shoulder is a bit longer than 223. Been using it for years, works fine.

Is the chamber brush like the ones in the picture? If so the end (bore cleaner) is sized for .223 bore and will get stuck in the bore of a .204. Can you link me to the type of .223 chamber brush you use? Thanks.

 

[PMA3]

Is the chamber brush like the ones in the picture? If so the end (bore cleaner) is sized for .223 bore and will get stuck in the bore of a .204. Can you link me to the type of .223 chamber brush you use? Thanks.

Sinclair has .20 cal bore mops.

 

[BobbyJ]

Sinclair has .20 cal bore mops.

Thanks I have a .204 bore mop and .204 bore brush.

I can't find a .204 chamber brush only a .223. All the chamber brushes I see have a tip on them that is .223 cal like in the photos. I guess I could get a .223 chamber brush and cut the leading end off that goes into the barrel.

 

[TheOtherZilla]

I use a brush for a different caliber. Like .38 or so.