20 VarTarg Reamer

[SmokinJoe]

Anybody got a finish reamer for 20 VT with .232/.233 or so neck that I could rent, buy, borrow or steal? Want to do a barrel PDQ & can't get a reamer for awhile. Let me know if you have anything available. Thanks, Joe

 

[Fat Albert]

and they also have the headspace gages
http://www.4-dproducts.com/display.php?group=Rifle+Calibers

 

[SmokinJoe]

Thanks Albert, I will check them out. Was hoping to find someone with a good reamer that they wanted to sell, doesn't seem to be happening.

 

[SmokinJoe]

An update, never really found anything, except Al directed me to 4-D Reamer rentals; they have one with solid pilot. Fred sent me a reamer print, but it wasn't clear whether the reamer cut a .224 (Kindler) neck or a .232 no-turn neck. One other person PM'd me that he had a couple different reamers available with .224 & .230 necks, but I really don't want to turn necks. Night before last I decided to Google for a 20 VT reamer (I am slow sometimes), and amazingly Midway came up as having the reamer & gages in stock, though it is also a solid pilot version. Unfortunately, Midway didn't know any of the dimensions, so had to go to PTG to get those, and after waiting awhile got the print via e-mail from Megun. Looked like what I think I want with .232 neck & about .050 freebore, so ordered the reamer & gages from Midway. I am amazed at what some of these folks come up with, and what others don't have sometimes.