• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

17 Fireball

snowpro440 said:
phil said:
Have you tried to run a neck expander mandrel through the necks before loading???

Crooked or dinged necks....I`m guessing your using Rem. brass.....

I expand and turn all my brass, so I haven`t ran into this YET.....
Phil Do you know what your diameter of the expander mandrel is ? .173 or .174 diameter. That's gonna be my next purchase.
Not sure that will help,
+1 on the previous suggestions, forming the 17 cal case neck will induce some case hardening in the brass. Some factory brass is annealed, some not. Also consider a bushing neck die so you can control the amount of neck tension, if you feel you have too much. With some cartridges 2 thou tension will give you the same grip as 4 on another case.
Not saying that 4 or more is no good, just most accuracy shooters would agree that 2-3 is what to aim for. Another option is to thin the brass neck, to reduce the tension, but this may not be a solution if your have more than 4-5 thou neck clearance in your chamber already.
Good Shootin!
L-46
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,322
Messages
2,216,580
Members
79,554
Latest member
GerSteve
Back
Top