168 bullets and the 284 Shehane using H4831

[Steveb]

Not much on the site I could find but are there any "good" loads for the 168 weight bullets and the 284 Straight or Shehane using either H4831 or H4831Sc. I am not interested in any other powders because I have lots of these powders instock. I understand 2900 to 2950 is the velocity node to run in.

Thanks

 

[284winner]

There is alot if info out there with what your asking. The numbers sound about right too. Keep looking and you'll find your answers. I can say that the H4831 powder is a great powder albeit on the slower side but truly accurate and consistent. 2900-2950 should be fairly realistic for the shehane provided barrel length is 26"+. Good luck.
Sorry read read your post and realized your question is with the 168s. Guess I assumed 180 bergers. I run a couple 284 straights and with the 168s achieve up to 3100 with H4831sc. I can PM you with more if you'd like. John.

 

[Steveb]

Thank John PM sent.