• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

147 eld-m 6.5x284 Norma

Does anyone have any load data with this bullet/caliber combination? I have plenty of info for 140 grain, but don't know where to start for the 147's. My available powders are Rl23, RL26, and H4831. Thanks!
 
A friend of mine started shooting them and he loves them. However, the trick to getting them to shoot, according to him, is having the proper freebore. He states that they have a VERY LONG bearing surface. I believe (not positive) that his freebore is .200! Having had 2 / 6.5 x 284s for competition, I know a bit of how that cartridge works. Of the powders you have mentioned, I would focus on RL-26. It is within a hairsbreath of the burn rate of H1000, which is the correct burn rate for that cartridge using a heavy bullet with a long bearing surface.
 
A friend of mine started shooting them and he loves them. However, the trick to getting them to shoot, according to him, is having the proper freebore. He states that they have a VERY LONG bearing surface. I believe (not positive) that his freebore is .200! Having had 2 / 6.5 x 284s for competition, I know a bit of how that cartridge works. Of the powders you have mentioned, I would focus on RL-26. It is within a hairsbreath of the burn rate of H1000, which is the correct burn rate for that cartridge using a heavy bullet with a long bearing surface.
A friend of mine started shooting them and he loves them. However, the trick to getting them to shoot, according to him, is having the proper freebore. He states that they have a VERY LONG bearing surface. I believe (not positive) that his freebore is .200! Having had 2 / 6.5 x 284s for competition, I know a bit of how that cartridge works. Of the powders you have mentioned, I would focus on RL-26. It is within a hairsbreath of the burn rate of H1000, which is the correct burn rate for that cartridge using a heavy bullet with a long bearing surface.
Thank you for the feedback! I'm a relative newbie and I have no idea how much freebore I'll have. Do you happen to know his charge with RL26?
 
Thank you for the feedback! I'm a relative newbie and I have no idea how much freebore I'll have. Do you happen to know his charge with RL26?
He was using the 147s in his .260A.I. and was using RL-23. His name is Tom Holbrook. He is TomHolbrook43 on this forum. PM him and he will be glad to help you..
 
I put together a 6.5x.284 and I'd like to try the 147 eldm. How far off the lands should I start seating my bullets?
Thx
Donny
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,832
Messages
2,223,896
Members
79,899
Latest member
Orville. Johnson
Back
Top