115 DTAC BN and my T2K

[PeterB]

patrick, i own a T2K which i recently rebarrelled with a 7.5 twist 28" pac-nor, it was deep chambered by them and i threaded and head spaced it myself. i use norma brass at long range with 115 moly d-tac, 38g AR2209 (H4350), .020 off, never cronied it but worked best in load development. extraction is no problem with this load. i use type S redding FL bushing die with .268 bush. Brass life is good so far with 5-6 loads. Not sure what reamer Pac-Nor use but i was pleased with the finish job throughout.
Fireformed winny brass works well for short range also, using a .265 bush, 38.6g with a 95 moly sierra MK . I FL ever time and have good brass life with this chamber and FL die. good luck, Pete

 

[hoverp]

Thanks guys. I appreciate your inputs.

I just got my barrel back from SSS today , they polished the chamber. I didnt think that it would do much but "PRESTO!!!" IT MADE A HUGE DIFFERENCE. There must have been something that I couldnt see on the post fired brass inspections and the chamber inspections...or they polished it enough to open up the base of the chamber just a bit. post fired measurements on the brass are all the same as before the polish job but now after 5 test rounds at 38.5 g H4350 on the same piece of brass I have NO extraction issues...smooth as butter!!

thanks guys for all the input and guidance.

you guys are great!...can you tell Im happy??