112g Match Burners

[Philly]

Hello all, I just traded for some 112 Match burners and looking for some load data for my 6br. Anyone here have any experience? Also have some 115 DTAC's. Any help would be appreciated.

 

[Philly]

Anybody?

 

[joshb]

112s and 115s are a little heavy for the 6br. I think I read here that most guys stop at 105s, maybe 108s in a pinch. I’m trying some lighter bullets these days. I have some 105s and 108s but I’m only using them in my new Dasher. My 115s get shot in my 6xc. Just throwing this out to you because of the lack of responses you’re getting. I would suggest you use the search feature to find the discussions I’m a little foggy on. Good luck!

 

[Philly]

Thanks. I did search but couldn't find anything. I'll keep looking.

 

[joshb]

How many 112s do you have? I’ve wanted to try some but in this waste land, I can’t find any. I might have some Hornady 105s to trade. I’ll dig thru my cabinets and drawers.

 

[Philly]

How many 112s do you have? I’ve wanted to try some but in this waste land, I can’t find any. I might have some Hornady 105s to trade. I’ll dig thru my cabinets and drawers.

I only have 100. Same with the 115 DTAC's. I should probably stick with105/109 Bergers.

 

[joshb]

Ok. Watch the classifieds. They pop up and go fast!

 

[Herzo]

25.0 grains of VV N135 is a 1/4 MOA load with the 112 in my 28" 1:7 twist 6mm AR loaded 0.010" short of the lands @ 2.360" COAL. The BR being a cc or so roomier than the AR, you might start below that and work up.

 

[Philly]

Awesome! I just happened to have a new 8lb jug of N135! Woohoo! I’ll give it a try. Thanks for the help.

 

[Herzo]

Awesome! I just happened to have a new 8lb jug of N135! Woohoo! I’ll give it a try. Thanks for the help.

I'll take 3# for the tip.

 

[xswanted]

Hello all, I just traded for some 112 Match burners and looking for some load data for my 6br. Anyone here have any experience? Also have some 115 DTAC's. Any help would be appreciated.

Having used them side by side with 110 Sierras in two 6x47s I’ve used the Sierra data for the 110 and not had any problems when starting with a mild load.

 

[joshb]

Here’s the Berger info. V135 use is suggested for the lighter bullets.

 

[Philly]

Here’s the Berger info. V135 use is suggested for the lighter bullets.

Awesome! Thanks for your help.