wildcat

  1. Need help for drawings for 6.5 Ackley Improved

    Hi comrades, I'm bussy with a project to build a 6.5 AI. The problem in Europe is, this caliber is not listed. To get the permission for this caliber, I need drawing for the cartridge and the chamber. Also, I need load data, max pressure and so far. Can some body help with some details or a...

  2. 250-7 Blaser (0.340 G7 @ 3400-3500 fps)

    Gentlemen, I have had quite a few customers want to run 257 WBY speeds but not run double-radius brass. The results of 257 WBY have been excellent with the 131 ACE but I understand their concerns and want to accommodate. In this case capacity the easy options are 257-264 Win Mag (perhaps...

  3. Wildcat Lovers Only

    MY most recent Creation. "7-KAM" for short. Uses 8x68s Brass.

  4. No Donuts when reducing Shoulder Angle / "263 Tactical"

    Is it possible to eliminate the dreaded Donut when going from 20 Degree to 30 Degree Shoulders? I am using Federal .270 Win Brass to create a 6.5mm Cartridge and it has a 30 Degree Shoulder. I see on another thread folks fighting with making .243 into SLR and the like and getting the...

  5. Fixing the 22nosler with Hagar brass.

    This might be an eye opener for those whom have lost faith in the 22 Nosler. This brass upgrade makes the cartridge perform as it should have from the beginning. I can wait to see the rest of the series of videos!

  6. 6 SLR Die Question

    Gday guys, hopefully this hasn’t been covered before. I have a 243 with a toasted barrel and about 1500 pieces of ADI brass to use. I would like to chamber a new barrel in 6SLR (110 Freebore) to shoot the 105 Hybrids or similar. Seeing as the body is the same as 243 could I just run the brass...

  7. 7mm/6.8 rem mag

    hey guys looking for a short answer to can i use my regular 7mm rem mag dies with a real tight neck size to bring the case to .270 cal? im nearly done with my 7mag barrel and relay like the barns 110 copper bullets. also i have 500 of them so might as well use them. is what i want to do easy...

  8. 7x55mm wildcat reloading

    Hello and thank you for viewing my thread. Im new to reloading and have recently bought a firearm to start with as i am also interested in custom cartridges. Its an old swedish krag jorgenson originally in 6.5x55mm that was cut down to carbine length had a williams peep sight added with custon...

  9. 7mm JRS Info?

    Seeking Dimensional information on the 7mm JRS. (Reamer Specifications) Mainly Shoulder Width and Height. I can't find any info on Google about this Cartridge. I am in the process of developing My 7mm. Thanks.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
168,555
Messages
2,257,735
Members
81,381
Latest member
vladupenn

Share This Page

Back
Top