savage

  1. Wanted: Savage 12 6BR Factory Barrel

    Looking for a factory barrel for my Savage 12 F-Class in 6BR. Low round count preferred. Shot mine out and I don’t want to send it out to savage for a replacement. Needs to be a factory barrel so it can stay in factory class. Thanks!

  2. Old member new twist, joined in 2008!

    Guys I can't believe that in 2008 I came here full of zest for benchrest, and my first post was about my encore rifle...lol imagine that a wise member replied and posted STOP!!! Man have I learned so much since that day, but I didn't stick around I have come and gone in and out of different...

  3. Savage 450 BM barrel

    I'm getting out of this caliber. Its just too much for my old ass shoulders. Its a young man's caliber. I have a used 16" Savage .450 BM barrel, Barrel nut, flash suppressor, and Bolt head (Unknown round count. I purchased used) $125 shipped

  4. Savage expertise please

    I just acquired a Savage 12 LRP ( magazine and HS Precision stock) for use by new shooters. The strange issue is that it only fires intermittently. The firing pin protrusion is 53 thou and a "Go gauge" is a very tight bolt close. Almost too tight. But it still refuses to fire factory ammo -...

  5. Left Hand Savage Model 11 MTD LSS Chassis 243 For Sell, Might trade Action and Chassis also For Right hand configuration.

    I purchased this rig to be set up on a tri-pod as a Coyote gun, but swapped over to an AR platform. This is a Savage Model 11 in 243 resting in a 1st GEN MTD LSS Chassis, located in Louisiana. Asking for $700 shipped your to FFL. However if someone has a RIGHT HAND ACTION and Stock set they...

  6. *** MDT LSS Chassis - Savage SA ***

    MDT LSS Gen1 Chassis w/grip and buttstock. Take off from Savage Stealth BA. I bought used a couple months ago and decided to go a different direction. Selling for what I have into it. Hopefully a good deal for some one! Came off of a Savage Stealth BA cambered in 6.5 Creedmoor and this was...
  7. Rocketvapor

    Savage Pin Protrusion Myth - or how to make friends on a gun forum without trying

    It's common knowledge that Savage stock/factory Dry Fire pin protrusion is high @ close to 0.060". Most say the primer dent stops the pin at around 0.025" deep. "Optimum" pin protrusion (0.035" - 0.040") is a little over required primer dent (0.025") to allow for some primers below flush, a...

  8. SOLD Savage model 12 SA action $350

    Was a 12 fv I’ve re barreled and now am parting ways has weaver rail Short action $400 shipped to ffl conos
  9. Grimstod

    Lubricating Savage Bolts

    I have had a large number of people ask me how to do it. So I made a video for it here. In addition to that I also wrote it up in detail on my website here. For those that prefer to read. I'll add some nice close up images as I get time...

  10. SOLD Savage 4.4" XLR Industries Evolution chassis

    I am selling a very nice XLR Industries Evolution chassis for the short action Savage repeater actions with 4.4" screw spacing and top bolt release. I recently switched to benchrest shooting so I am selling this chassis to fund another build. Chassis in in near perfect condition with very low...

  11. Looking for someone to turn a large shank savage barrel to install into a standard shank action.

    Title says it all, I have a small shank action but a couple of large shank barrels laying around that I would like to use. I have seen threads on the forum where this has been done before but they were a few years old. Anyone that can do it or have a contact that can do it just shoot me a PM.

  12. Pierced Primers on 2nd Firing - New Build

    Hi guys, I know there are a bunch of threads on here about this, but I think this might be a stumper. I posted other pics a month or so ago of a 6.5 Creedmoor build I did working off a Savage 12 action. I ordered 100 pieces of new small rifle primer Lapua brass for competition use just for...

  13. Comments/suggestions -- Atlas BT65-LW17 bipod for a Savage 110

    Just picked up a Savage 110 rifle (#57008 Tactical Desert) and am considering getting an Atlas BT65 bipod for the thing. Bipod -- Atlas BT65-LW17 CAL Gen2, with the ADM-170-S lever lock, without the panning feature. Rail -- Atlas BT15 3.35" 1913 BT15 picatinny rail (hole spacing 1.76" -...

  14. Savage Axis II Precision in .223 questions.

    Hi all, I just recently ordered a Savage Axis II Precision in .223 (Savage website #57549). I was looking through my manuals (6 of them) for load data as I intend to shoot reloads through this rifle. Trouble I'm finding is data that applies to a bolt action rifle with a 22" barrel and a 1:7...

  15. Indexing a prefit barrel

    I did some measurements yesterday and I need some info before I try anything. The first question Is for people who index your barrels. Do you think I can use thickness between the bore and the outside of the muzzle to determine muzzle runout? Is that a fair indicator of where the bore is...
  16. ranger0787

    SELLING Savage 110 FCP #19481 in .338 Lapua +XLR chassis

    I have a Savage 110FCP in .338 Lapua Magnum in an XLR Chassis and Fat Bastard Muzzle Brake; Sold the original stock. Scope and Bipod not included. I had it on here a few years ago back in 2016; thought a Marine from Kalifornia was buying it, broke off contact with me, never bought it. Still...
  17. RaggedHoleBarrels

    SELLING Savage & Remage prefits

    Offering Savage ($260) and Remage ($280) prefit barrels cut from stainless steel Wilson barrel blanks. We have calibers .17 - .505 available in #2, #4, #5 (available in calibers 9.3 and up) and Light Varmit contours in stock. We most likely have the reamer for the cartridge you want so lead...

  18. WTB Savage benchrest stock for model 12 single shot, 4.40"

    WTB benchrest stock for Savage 12, single shot, 4.40" screw spacing (3screw), old style trigger guard, bull barrel
  19. Grimstod

    Firing pin rant

    So just a quick rant here. It is no secret that I bush a lot of Savage Bolts. And as such I work on and see hundreds of these. Now typically 97% of the firing pins that I encounter in Savages are crooked. That means they rub and cause a lot of issues etc etc yada yada. But will you look at this...
  20. johnnyi

    Amazing display of F -CLass FTR shooting!

    I wanted to give a shout-out to a fellow club member on an amazing round of shooting! We had registered 300 Yard F Class Match Sunday at Bayou Rifles in Houston, Texas. Fredrik Sjodin put together an absolute amazing round of shooting! We had a typical Bayou morning of building conditions...

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
164,708
Messages
2,182,920
Members
78,492
Latest member
Paulsen27

Share This Page

Back
Top