remington 700

  1. SELLING MDT ACC Premier GEN2 Chassis Rem700

    For sale is a NEW MDT ACC Premier GEN2 non-folding chassis for Rem700 style actions. Chassis is new. I opened the box, assembled the forend with the stock and its been hanging on wall since. I will ship it assembled as by default it comes in two separate boxes which will increase the shipping...

  2. SOLD 6.5 CM Barrel

    Custom Rifle Barrel from Schneider, 5P rifling in Heavy Varmint contour, 26-inches OAL, with threaded muzzle (5/8x24) and cap. Chambered in 6.5 Creedmoor, and threaded for Remington 700 receiver. Has shot 1,705 rounds - all documented (journal available). Weighs just under 7 lbs. Exclusively...

  3. SELLING R700 SA Hogue Stocks

    For sale two (2) Hogue over molded stocks for the Remington 700 short action. These stocks are like new take-offs from the technical rifles, both for internal magazines (BDL) and standard barrel pillar bedding. Neither have bottom metals. Green Ghillie pattern from R700 SPS 300 BLK… $80 shipped...

  4. SOLD Remington 700 AAC-SD in 300 BLK

    This build begins with an off-the-shelf Remington 700 AAC-SD in 300 BLK. Barrel details: 16.5” 5R, 1:7.25” twist, threaded 5/8”-24 TPI. With the following updates: Bolt milled/threaded added AREA 419 bolt knob, 20 MOA one-piece Picatinny scope base, Timney #512 NP w/safety trigger 1.5-4 pound...

  5. SELLING Bergara HMR Left Hand Remington 700 LA Stock $250

    Like new stock. I had a Remington 700 with a #4 Wilson barrel in for reference. Comes with butt spacers and bottom metal that takes AICS magazines. $250 plus shipping or possible trade for sporter style HS, McMillan, etc.

  6. SOLD Remington 700 20” SPS Tactical .223Rem Barrel

    This is the stock 20 inch barrel taken off a new Remington 700 .223 Rem caliber rifle. It's in like new condition with less than 100 round through it. Includes stock recoil lug. Taken off soon after I got the rifle to convert to 300 Blackout. 20 inches tactical contour barrel Twist Rate: 1:9"...

  7. ^^^FOR SALE^^^ LA RH 700 Stock (SOLD pending funds)

    FOR SALE: What I believe to be a Bell & Carlson (got it second hand, so I'm not 100%) stock for a LA Rem 700, Inletted for a Remington Varmint/Sendero/PSS barrel profile, aluminum bedding block, was bedded to my action/recoil lug/BDL bottom metal so you'll have to re-bed it to yours. Pachmayr...

  8. Remington 700 receiver drop/radius behind loading port

    I am working on a Remington 700 based optic mount design and can't find any information on the dimensions highlighted below. I can tell that the recessed face it has a radius to it, and I can roughly measure the drop with an action I have on hand but I can't measure the radius accurately with...

  9. SOLD Bix'n Andy Remington 700 Competition Trigger - Single Stage w/no Safety

    I have a lightly used Bix'n Andy Remington 700 Competition Singe Stage Trigger with no safety. It was on a backup rifle that I sold. It has some marks where the alignment pins hold it to the trigger hanger. However, it has only been used for about 200 load development rounds. Price: $400...
  10. CoolArrowMarksman

    Turning old .243 Rem 700 in to Hunter Class Silhouette Rifle

    I'm rattling around the idea of turning my dad's 1978 .243 Remington 700 in to a Hunter Class Silhouette Rifle and want to see what the opinions might be on best approaches. The goal would be to breathe new life in to the gun, it just sits in the safe doing nothing unless my one friend wants to...

  11. ejection/extraction

    Hello All, Remington 700, PTG bolt with m-16 extractor dropping the case as it is being pulled out Usually half way to almost all the way out. does it with snap caps, after firing, and with spent cases I pulled out the ejector and the extractor pulls case all the way out no issues, If I pull...

  12. Mid-long range predator build

    Hi guys, I'm new to the forum and would appreciate so input here. I'm looking into building a mid-long range predator rifle (which is also my first build). I have a Rem. 700 6.5CM sps. Has threaded barrel and picatinny rail scope base. Been around guns my entire life, just never really into...

  13. New RR actions

    @Dusty Stevens thread got me off topic, the primary extraction sucks on three R700s as does the bolt fit, but the fact is the action themselves have come lightyears from the last prefix. I think we need to thank @Dave L Kiff for kicking big green into the future. This was one I did today, right...

  14. Rem 700 bolt binding

    I have a Remington 700 action that I purchased a PTG bolt for and it seems to bind while feeding. It seems that pressure on the bolt handle puts lateral pressure on it and it binds up. if I push on the back of the bolt with my thumb it goes fine. If I use a factory bolt so sloppy there is no...

  15. odd headspace rem 700

    Hello all, I have an odd situation, this is my first 700 I have done numerous savage with the nut. when setting my head-space the bolt falls into place with the go gauge (literally no force just falls in just a little down pressure at the end) and does not close with the no go gauge, seems good...

  16. Leupold VX6-HD

    im seriously thinking of purchasing a leupold vx6-hd 4-24x52. I was wanting some info on if anyone had used one or been behind one. Looking for tracking and quality of glass, etc. thanks Colby

  17. Remington 700 Trigger Guards

    Hey everyone, longtime reader and one of my first posts. Ok, so I was helping my brother build a Remington ADL into a bench gun. It started with the tupperware stock and plastic trigger guard. The new stock has a full length aluminum bedding block, not cut for a mag(he knew this). Almost...

  18. Alamo Precision Rifles - Go?/No Go?

    I've had my eye on APR (Alamo Precision Rifles) out of Texas for some time. I own many many Rifles but have yet to purchase a Rem 700 of any kind. Looking to do 1000 yard + work so I'm interested in their "tactical" line which includes the Greyboe brand stocks. My broad question is, does anyone...

  19. Is this 700 Bolt Wear Normal?

    Hey all, new to the forum and a beginner to precision shooting. I have 115 rounds through my Remington 700 LR in 7mm Rem Mag. I noticed the bolt had some wear on the bottom and wasn't sure if this is normal. Sorry for the newbie question. Any insight is appreciated. (Bolt upside down with...

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
167,027
Messages
2,226,869
Members
80,132
Latest member
Rowdy357

Share This Page

Back
Top