pt&g
-
stock inlet problem at GRS bifost
Please lend me your wisdom. This past August, I requested Pacific Tool and Gauge to machine an M5 inlet into a GRS resin stock (a fitting service for the bottom metal). Yesterday, the item finally arrived. Upon inspection, I discovered it was a botched piece of junk. When the bottom metal...- bmj71371
- Thread
- grs inleting pt&g
- Replies: 16
- Forum: Gun Project Questions & Gunsmithing
-
ejection/extraction
Hello All, Remington 700, PTG bolt with m-16 extractor dropping the case as it is being pulled out Usually half way to almost all the way out. does it with snap caps, after firing, and with spent cases I pulled out the ejector and the extractor pulls case all the way out no issues, If I pull...- go gunner
- Thread
- Replies: 11
- Forum: Gun Project Questions & Gunsmithing
-
PT&G, above and beyond.
I just had to recognize Pacific Tool and Gauge for their outstanding customer service. After waiting 139 days for my gunsmith to rebarrel my action it arrived with what I thought was a defective bolt head. The ejector was much too high and rather than eject a case it just shoved the nose down...- Gunracer
- Thread
- Replies: 8
- Forum: Main Message Board
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.