dasher

  1. Selling Custom 6 Dasher on BAT DS action - PRT Lowboy stock - Krieger

    Selling my 6 Dasher light gun smithed by John King of Montana. This one is very accurate and set a few club records. I included two pictures of back-to-back five shot targets at 1000 during testing. This custom Dasher has a PR&T Lowboy stock with a custom Hydrodip with clearcoat. Jewel...
  2. driftersgear

    SOLD Alpha 6mm Dasher and 6mm CM Brass in Stock

    Alpha 6mm Dasher and 6mm Creedmoor is now in stock!!!! 119.99 plus shipping. Next up 6GT, followed by BRA and 22 GT. https://driftersgear.com/products/alpha-munitions-brass-6mm-dasher-unprimed-box-of-100 https://driftersgear.com/products/alpha-munitions-brass-6mm-creedmoorunprimed-box-of-100

  3. 6mm Dasher GO gauge needed

    Howdy all. Hope some one can help. A friend has MY 6mm Dasher Go gauge and will likely have it for next few weeks. I need one for a couple of weeks and PTG everyone else is back ordered. Would like to rent one, pay shipping both ways. Would appreciate any help. Thanks in advance. Tim...

  4. 6mm Dasher Go Gauge needed

    Howdy all. Hope some one can help. A friend has MY 6mm Dasher Go gauge and will likely have it for next few weeks. I need one for a couple of weeks and PTG everyone else is back ordered. Would like to rent one, pay shipping both ways. Would appreciate any help. Thanks in advance. Tim...
  5. Stray8

    Magpul AICS Dasher/BR Kit

    I recently read the popular thread about modifying a Magpul AICS mag to make it more reliable with 6BR and improved cartridges. I believed that it could be done without modifying the magazine body or geometry of the spring. Many people have no issues with magpul and BR rounds, but as I am...

  6. 6 dasher is 7 twist too much

    I'm looking at building a 6 Dasher and when I went to buy the barrel in 8 twist. All that is currently available is 7 twist. I'll be shooting mainly Sierra 107's, Berger 105 hybrid, Hornady 108's, but had hoped to shoot shorter bullets as well. Wondering if anyone has any experience with a 7...
  7. Forum Boss

    6mm BRA for PRS -- Great out of the Gate

    This rifle belongs to Shane Sivertsen (aka SoDakDasher in our Forum). It features a Lone Peak Fuzion Action with Trigger Tech Diamond trigger (flat shoe). Up front is a Benchmark 26” MTU barrel chambered in 6mm BRA (a 40-degree 6mmBR Improved “BR Ackley”). It’s all nestled into a McMillan A5...

  8. Bruno's has 6mm Dasher brass in stock

    Norma 6mm Dasher brass back in stock at Brunos! https://www.brunoshooters.com/product/3443.html SHOP NOW!
  9. Dave Way

    Moving backers at 1,000 yards???

    So the groups just keep getting smaller and smaller every year. Sub 1" is sure to fall. Any predictions if we'll ever see moving backers in 1,000 yard bench-rest? They have been required in short range bench-rest for years to verify the number of shots in the group. Seems most 1,000 yard...
  10. Mulligan

    600 yard IBS matches in Western Colorado

    All, The Western Colorado Rifle and Silhouette Club will be hosting 600 yard IBS matches this year. This is new to us and we hope to expand the program in the coming years. We will kick off the season with a demonstration/Cabin Fever shoot on Feb 9th. We have 4 registered matches scheduled for...
  11. Dave Way

    Sorting match cases by H2O capacity

    When setting up for a new LR rifle or barrel, I normally fully prep a bunch of brass. After squaring primer pockets, trimming to length, turning necks, etc., I then wash the brass to remove all lubricant and any remaining brass particles before weighing. I start with a large enough number of...
  12. Mulligan

    Comparing AR-Comp with H4895

    I did not realize just how close these two powders are, in regards to velocity (at least in my Dasher). They are nearly in lock-step with each other at 50*F, again at 4800’ in my Dasher. I shot two ladder tests today and the above velocities are from my Lab-Radar. I never observed any...

  13. 6 Dasher 1:7 - 115 dtach - what powder?

    What powder are you guys using with the dtac's? I have some Varget and RL15 to use, wondering if something slower might work better with these heavier bullets.

  14. Deep Creek 1000 Yard Shooter, Bill Brown, has left the range

    It is with great regret that I inform you that our good friend Bill Brown has died. He was our President for many years and one of the foundation 1000 yard shooters at Deep Creek in Missoula, MT. Anybody that has shot 1000 yards there has surely met Bill, the guy with the big smile and his hand...

  15. Deep Creek 1000 Yard Shooter, Bill Brown, has left the range

    It is with great regret that I inform you that our good friend Bill Brown has died. He was our President for many years and one of the foundation 1000 yard shooters at Deep Creek in Missoula, MT. Anybody that has shot 1000 yards there has surely met Bill, the guy with the big smile and his hand...

  16. Deep Creek 1000 Yard Shooter, Bill Brown, has left the range

    It is with great regret that I inform you that our good friend Bill Brown has died. He was our President for many years and one of the foundation 1000 yard shooters at Deep Creek in Missoula, MT. Anybody that has shot 1000 yards there has surely met Bill, the guy with the big smile and his hand...

  17. Deep Creek shooter has left the range, Bill Brown

    It is with great regret that I inform you that our good friend Bill Brown has died. He was our President for many years and one of the foundation 1000 yard shooters at Deep Creek in Missoula, MT. Anybody that has shot 1000 yards there has surely met Bill, the guy with the big smile and his hand...

  18. Concentricity Issue on 6 Dasher

    I was checking the concentricity of my 6 Dasher loads (Lapua BR turned, Berger 105g 6mm hybrids). The brass checks out almost perfect around 1/1000 using a Sinclair concentricity tool, but loaded rounds are off by as much as 5/1000 measuring off the ogive. No expander ball, Lee #2 case holder...

  19. New Dasher Brass from bullets.com

    Like an idiot I decided to give the dasher brass from bullets.com a try... again! Here's how they describe it: This extra-sturdy brass is the new and improved version featuring a normal rim thickness that fits your standard shell holder! Unlike the first drop of the brass, it DOES fit into the...

  20. Dasher sizing problems

    So I'm using lapua blue box brass. No neck turn dasher. My loaded rounds measure .268. I'm using a Redding bushing die with a .266 bushing. After I size my brass the bullet will push in with my fingers?? I can remove the expander button and it will work fine with a .266 bushing?? Do I need a...

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,694
Messages
2,200,956
Members
79,060
Latest member
Trayarcher99

Share This Page

Back
Top