7mm

  1. 7x57 clean out

    A fine cartridge, but I'm done with it and that barrel is being scrapped. So this stuff needs a new home so I can buy more primers and powder. Had lots of partial boxes with 10 or 15pcs of 110gr to 175gr bullets left, but round filed those, who want 10 or 15pcs of this or that? Rimrock, 130pcs...

  2. Reloading Components for 6mm, 6.5, .260, 7mm, 7mm-08

    I have quite a few items I am looking to sell. I am including pictures and the prices in the listing. Let me know if you have any questions and thanks for looking. *May consider trades for 7.62 x 39 and 9mm dies and components for 7.62x 39, 9mm, .308.*

  3. SOLD L.E. WILSON 7MM BULLET SEATER

    L.E. WILSON BULLET SEATER 7MM REMINGTON MAGNUM $45 OR BEST OFFER + SHIPPING FIRST "I'LL TAKE IT" WINS AUCTION

  4. 7mm rem mag brass neck wall thickness

    Is there a chart/ list somewhere with neck thicknesses of 7 mag brass. I did a few searches but didn't yield much. My main issue is with brass for hunting purposes only. I have some new prvi and winchester brass that the necks are .003" thinner than older brass of several manufacturers. It is...

  5. 7mm rem mag powder choice

    I am looking to load for my new 7mm Rem Mag. I am planning on shooting a Berger 180 VLD Hunting. Don't want to waste a lot of time testing several different powders if I can get down to the best one to start with. Thanks for any input

  6. Wildcat Lovers Only

    MY most recent Creation. "7-KAM" for short. Uses 8x68s Brass.

  7. Recommendations for 7mm Build

    Hello all, It's been a while since I've posted on here but with summer coming around I'll have a little more free time and I plan on finishing up a project I've had sitting for quite a while. This is not going to be a competition rifle. More just for fun. I will be doing all of the barrel work...

  8. 7mm/.284 Win Rifle build

    Hello everybody. I just started another rifle build this time from the ground up. Action will be a Defiance Deviant, barrel is a Brux 1-9, trigger by Jewell, scope by Schmidt Bender and gunstock is a custom build by me in aluminum and carbon fiber. I'm a machinist by trade and I been building it...

  9. newly released BERGER 184 Hybrid (.284)... preliminary load data and results compared to 180 Hybrid

    A lot of folks have been waiting patiently for the new Berger 7mm 184 grain Hybrid. I got a few thousand come in recently and started (not finished) some load investigation. I thought I would share some information on what I am seeing ... in the hopes that it expedites other’s load...

  10. Which 7mm chambering?

    Hi all: Just picked up a 7mm 1:9 22" barrel blank at a online gunsmith liquidation auction. I have a savage long action with 30-06 bolt face in my safe just waiting to be the next project gun. Wanting to make a medium game hunting rig out of it, with a touch of long range (300-500 yds) in the...

  11. 7mm Practical Info

    Hello everyone. This is my first post on the forum (long time lurker). I’m currently in the middle of a build and have been debating on chambering a barrel in 7mm Practical. This is going to be a dedicated long range rig. I’m not very concerned with “Just build it in 7mm Rem mag”. I want to do...

  12. New Wildcat, now what to Build?

    I've got my Lifelong desire to have a 7mm Express on Steroids in the works. I have never built a Long Range Rifle before. I have some interest in a Mauser Action. I want most of my budget to go into a Barrel and Glass. Where to Start? What are some good realistic Budgets. Yea I want 35MM Scope...

  13. 7mm JRS Info?

    Seeking Dimensional information on the 7mm JRS. (Reamer Specifications) Mainly Shoulder Width and Height. I can't find any info on Google about this Cartridge. I am in the process of developing My 7mm. Thanks.

  14. Nosler Ballistic Tip true BC

    Hi guys, I'm desperately searching for true/tested BC of Nosler's 7mm Ballistic Tip 140gr. Does anybody know something? Any info will be very appreciated. Thx.

  15. Berger 168gr VLD Lot to Lot HUGE deference

    Please check out my video and comment. Base to ojive measurements

  16. 7mm, something in-between WSM and 28 Nosler

    I seem to be drawn to the children of the 404 Jeffrey case. I'd like a bit power than the WSM but not so much of a barrel-burner like the 28 Nosler. I'm guessing about 75 grains of case capacity. If there is something halfway between those two that I'm just seeing, I'd love to hear about it. Thanks!
  17. Joe R

    I keep thinking about a 7mm

    I’m trying to stay focused on F-TR, but I keep thinking about a 7mm. I know that the straight .284 is the current favorite, but since I’m very familiar with the .308 and I have lots of .308 brass I was thinking that a 7-08 may be a good option for me. Additionally, I would be able to use the...

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,311
Messages
2,193,526
Members
78,832
Latest member
baconbag

Share This Page

Back
Top