6bra

  1. varminthunter1

    SOLD *Reduced 22 BR Rem brass

    Selling 150 pieces fired 1x Remington 6br brass neck turned to .010". Brass is necked down to 22 cal and fired. $80 shipped bulk, add $12 if you want the boxes. (Three 50rd)

  2. Selling Zeus Short Action Full Thread 6BRA Barreled Action

    $1450 Zeus SA full thread 308 bolt face barreled action. Benchmark 1-7.5 RH 27” BRA 1.25” straight contour 3/4x24. 120 FB 700 rounds through action, and barrel after 1” set back. Still shoots fine to get started with the Zeus. $1450

  3. SELLING SPF -- Stiller Viper Drop Port - 6 BRA - A. WHEELER Barrel Job - .268 Neck

    My buddy is experiencing a weak moment in time and thinks he is ready to sell his rifle. His bad decision can be your smart decision. For sale. Used Benchrest rifle, with Stiller action, Tracker Stock with 4 inch wide forend via machined and inlet wooden plate. (Nice job.) 6 BRA with .268 neck...

  4. Need Help - 6BRA & IMR4166 Fire Forming Load

    Hello, I picked up my first 6BRA barrel a week ago or so. I've got Peterson 6BR brass. I've got CCI 450's and plenty of 105/107/109 bullets. The only powder I have in mass is IMR 4166 Enduron. I'm looking for a suggestion of where to start. I see data for the 6BR and 4166 in the Sierra...

  5. 6 BRA headspace issue

    Hi all, having an issue with my 6 BRA, I've got some used 6 BRA brass from two other rifles and it's ~0.012" shorter at the shoulder than cases fired in my barrel. Background is that I bought the barrel for my Tikka secondhand, I know it's a no turn and I assumed it was otherwise the standard...
  6. Forum Boss

    6mm BRA for PRS -- Great out of the Gate

    This rifle belongs to Shane Sivertsen (aka SoDakDasher in our Forum). It features a Lone Peak Fuzion Action with Trigger Tech Diamond trigger (flat shoe). Up front is a Benchmark 26” MTU barrel chambered in 6mm BRA (a 40-degree 6mmBR Improved “BR Ackley”). It’s all nestled into a McMillan A5...

  7. 6BR (BRA) with 0.104” Freebore - Does this look right?

    I’m trying to figure out if I’m crazy or not. I’m loading fireforming loads for my new 6BRA using virgin 6BR brass and 105 Hybrids. The barrel was chambered with a new JGS 6BRA reamer, 0.271” neck, 0.104” freebore. Barrel is a 0.237” Bartlein 4 groove. Using a Hornady BTO tool, I’m measuring...
  8. Dave Way

    Target free ladder test?

    So recently I received a new 6BR Improved from Alex Wheeler. After forming brass, and some 500 yard testing, I decided to do a powder ladder at 1K. I tested five loads at .1 gr. increments from 30.4 to 30.8 grains of H4895 with a 103 Vapor Trail. 30.4 gr. 2,933 fps avg. ES=6 fps 30.5 gr...
  9. Shooter13

    6BRA for short range?

    What is the thought on this? Benchrest from 100-300 yards with the BRA, good? Bad? or just Ugly? Will it compete with the likes of 6PPC or 30BR? or even the 6BR??
  10. Dave Way

    Moving backers at 1,000 yards???

    So the groups just keep getting smaller and smaller every year. Sub 1" is sure to fall. Any predictions if we'll ever see moving backers in 1,000 yard bench-rest? They have been required in short range bench-rest for years to verify the number of shots in the group. Seems most 1,000 yard...

  11. Chambering 6BRA?

    What is the best way to chamber 6BRA with .004 crush? Would you just use a feeler gauge between shoulder and action or would you chuck the 6BR go gauge and shave .004 off the back? Thanks,
  12. Dave Way

    Sorting match cases by H2O capacity

    When setting up for a new LR rifle or barrel, I normally fully prep a bunch of brass. After squaring primer pockets, trimming to length, turning necks, etc., I then wash the brass to remove all lubricant and any remaining brass particles before weighing. I start with a large enough number of...

  13. When to neck turn 6BRA?

    Hi all, New to the forum, but not a new shooter. I've been shooting 6.5x47L the past few years and plan to try a 6BRA next year. I have a 21st Century turning lathe and plan to neck turn to a minimum clean up (more for consistency - I have no plan to use a tight neck reamer), but I'm...
  14. 1911mag

    Van Meter, IA Aug F Class Results

    Thanks to Lee Wells for putting on another F Class shoot in the schedule. Link below for results. That Jr shooter Dustin Godman almost repeated 2 wins in a row with the 6BRA. All top 3 shooters 795 scores, came down to “X” counts. Great job everyone...

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,781
Messages
2,203,287
Members
79,110
Latest member
miles813

Share This Page

Back
Top