6br

  1. Wanted: Savage 12 6BR Factory Barrel

    Looking for a factory barrel for my Savage 12 F-Class in 6BR. Low round count preferred. Shot mine out and I don’t want to send it out to savage for a replacement. Needs to be a factory barrel so it can stay in factory class. Thanks!
  2. varminthunter1

    SOLD *Reduced 22 BR Rem brass

    Selling 150 pieces fired 1x Remington 6br brass neck turned to .010". Brass is necked down to 22 cal and fired. $80 shipped bulk, add $12 if you want the boxes. (Three 50rd)

  3. BAT Custom bechrest rifle 6br

  4. SELLING NEW Lapua 6BR NECK-TURNED Brass

    I have hundreds of pieces of brand new Lapua 6BR brass, all neck-turned, with the primer pocket and flash hole uniformed, all done in Speedy Gonzales' shop. It is in 100 round MTM plastic boxes by matching lots. If you buy more than 1 box, I can send you matching lot number brass. $275 per...
  5. driftersgear

    SELLING Lapua 6br Brass

    LAPUA 6BR BRASS We have lots of 6br brass in stock. Below is the link for easier checkout. PM or call us if you have any questions. https://www.driftersgear.com/product/6mm-br-100-box-brass#product_detail

  6. SOLD PMA BORE GUIDES W/ EXTRA INSERTS

    PMA BORE GUIDES W/ EXTRA INSERTS BAT 3LL 6BR 284 WIN $35 EACH + $17 SHIPPING (CAN COMBINE SHIPPING FOR BOTH) SPEEDY GONZALEZ 9023 HUEBNER RD STE 102 SAN ANTONIO, TX 78240 FIRST "I'LL TAKE IT" WINS AUCTION. PLEASE PM FOR PAYMENT AND SHIPPING AFTER.

  7. SOLD 200 once fired Lapua 6br cases

    For sale is 200 once fired, tumbled, and annealed 6br Lapua cases. Some have been deprimed and tumbled in stainless media, and the rest cob media with fired primers still in them. $230 shipped or $220 if you can pick them up from me in Maricopa AZ. Z E L L E, Paypal, money order or check for...

  8. Custom Norma 6MM BR

    Never fired custom 6BR. Hart action and 26" Fluted Kreiger barrel. McMillan A5 stock with hydrographic camo dip. Brand new dies, bullets and brass. $3250 + shipping.

  9. Sale Pending funds - Stolle Panda Heavy Varmint 30br / 6br switch barrel

    Selling a Stolle Panda Heavy Varmint 30br and 6br Bench Rest Rifle. Smith work done by Billy Stevens (Stevens Accuracy) on all 3 barrels that come with this rifle. I purchased the rifle from Billy Stevens in 2016. The "Andress barrel in the photo came with the gun initially. Billy...
  10. Shooter13

    Next up! 6BR build OKAY 6BR-DX

    I have a Shehane tracker stock with a BAT M action, I'm getting a Kreiger 8 twist HV barrel and going to have @gunsandgunsmithing chamber it (this is a build for next year), the reamer is a no turn neck with 99 freebore. This is to shoot 200-600 yards and thinking of using 80 GN FB and 95 GN...

  11. Barrel Specs 101 -- importance of various specs, with bullet type and weight

    Am looking for a "Barrel Specs 101" type summary of the details of barrel selection, when re-barreling for, say, the 6BR caliber. If there's a great technical summary, someplace, I'm all for it. (Haven't found one, yet.) Assumptions: 6BR caliber Heavier, longer, VLD-type bullets preferred...
  12. Stray8

    Magpul AICS Dasher/BR Kit

    I recently read the popular thread about modifying a Magpul AICS mag to make it more reliable with 6BR and improved cartridges. I believed that it could be done without modifying the magazine body or geometry of the spring. Many people have no issues with magpul and BR rounds, but as I am...

  13. 6BR (BRA) with 0.104” Freebore - Does this look right?

    I’m trying to figure out if I’m crazy or not. I’m loading fireforming loads for my new 6BRA using virgin 6BR brass and 105 Hybrids. The barrel was chambered with a new JGS 6BRA reamer, 0.271” neck, 0.104” freebore. Barrel is a 0.237” Bartlein 4 groove. Using a Hornady BTO tool, I’m measuring...
  14. Dave Way

    Sorting match cases by H2O capacity

    When setting up for a new LR rifle or barrel, I normally fully prep a bunch of brass. After squaring primer pockets, trimming to length, turning necks, etc., I then wash the brass to remove all lubricant and any remaining brass particles before weighing. I start with a large enough number of...

  15. 6 SLR Die Question

    Gday guys, hopefully this hasn’t been covered before. I have a 243 with a toasted barrel and about 1500 pieces of ADI brass to use. I would like to chamber a new barrel in 6SLR (110 Freebore) to shoot the 105 Hybrids or similar. Seeing as the body is the same as 243 could I just run the brass...

  16. Which caliber

    I'm looking at another rifle and debating between 6 br, 6brx, 6 BR a, 243, 6 mm Creedmoor and potentially maybe another 22 250 . I already have 2 6.5 Creedmoor and a 243 as well as 6br. The use would be anythong from Target shooting to prairie dog hunting, good accuracy and easy to reload...

  17. Load Work up 95 gr berger VLD Jumping

    Hello, Back story, the berger 105's arnt shipping for another 2 months. Having a couple matches come up I bought a small pile of 95's. Problem: my throat is long for 105's. I don't have enough bullet of the 95's seated in the case to touch the lands, let alone jam them. So I am working up a...

  18. 6BR, throat length for 80 grain bullets

    I am building a 6BR rifle, I want to use berger 80 grain fb varmit bullets, what is the best throat length using these bullets?

  19. best loads for 6br 8 TW 58 VMAX or 75 gr. VMAX

    I'm wondering if anyone has any great 6BR loads 8tw with 58 Gr VMAX or 75 VMAX mainly for PD's. I had worked one up with H335 but it was too temp sensitive. Thinking IMR 8208, Benchmark, or H4895 would work better but thinking someone out there has done the work and found the best choice.
  20. Panama Evans

    6mm neck trimming

    Hello everyone I recently started shooting 6mm Norma in a savage 12f. I did as much research as I could within my limited abilities, and have learned about neck case turning. My question is, is this something I need to do. At this point I'm using lapua brass, and a Forster FL die honed to .002...

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
164,951
Messages
2,186,966
Members
78,605
Latest member
Jonathan99

Share This Page

Back
Top