243

  1. SELLING Selling 6mm/.243 and .338 Vickerman seating die insert kits $20 plus shipping

    I am selling two caliber kits for Vickerman bullet seating dies. One is 6mm caliber and the other is .338 caliber. These are not complete dies, just the parts for setting a Vickerman seating die up for a different caliber. These are caliber-specific (well, the windowed insert and seating...
  2. CoolArrowMarksman

    Known Loads for .243 90 grain bullets? IMR4350 and short on time

    Looking for help for quick load development just to get me in the game for the upcoming Texas state silhouette match. Limited on time for load development so I thought I'd ask the hivemind. Crossposted on steelchickens as well. OEM 1980's Remington 700 in .243 1-10 twist I have IMR 4350 and...

  3. Rebarreling my savage 243.

    Hey guys. New to the forum here. I’ve been thinking about getting another barrel for my savage 243 since I’ve put a lot of rounds through it. What would be the best twist rate for primarily 55 gr bullets. Should I stick with a 1:10 or go to a 1:12.

  4. 243 not sure if over pressure or not

    I'm building up a 243 round with h4831 and I'm getting a mark on the case head from the ejector pin. Also have makings on my bolt head just looking for some direction as to where I'm going wrong or if there's anything wrong at all. I have a few pics of the issues

  5. 243 load H4350 with nosler bt 90 help

    I’m new to this page so bear with me .. I’m working on a load for mi .243 win. I have my brass trimmed 2.040 and was wounding about seating depth .. nosler book calling for 2.680 Hornady 2.640 Hodgdon 2.625 and I have no issues with them seating at 2.690 I check to see where they hit my landing...

  6. interesting results!

    so earlier this year i had my 22" 243 win shortend down to 16" fulley embracing the idea i was going to be having velocity losses. however, this would apear not to be the case. i was predicting velocities of around 2700 or 2800 at a push. today i was out accuracy and drop testing at...

  7. Sizing 260 brass to 243 risks

    I have decided to retire my 260 and have a hundred rounds of 260 brass Lapua brand that I would need to size to 243 am I running the risk of Donuts or anything else. My 243 out shoots my 260 so I'm trying to move in that direction. Would I want to run.them through a FL sizing die first before...

  8. Which caliber

    I'm looking at another rifle and debating between 6 br, 6brx, 6 BR a, 243, 6 mm Creedmoor and potentially maybe another 22 250 . I already have 2 6.5 Creedmoor and a 243 as well as 6br. The use would be anythong from Target shooting to prairie dog hunting, good accuracy and easy to reload...

  9. what is everyone using with 105 hybrids in 243?

    Getting ready to load this and wondering what everyone is using and how that is performing.

  10. New .243 Winchester Build

    I’ve decided to build a .243 Winchester and would appreciate any advice. I will be shooting from a bench at 100, 200 and 300 yards (and the occasional gong out to 600, but focusing on 200-300). I really like the Savage style barrel/nut setup and currently have a Rem/Age version on a Remington...

  11. Will a 260 body die Work ro resize a 243 cartridge

    I bought some used once fired 243 brass and looking to resize the body with a Redding bushing die because I have a Lee Colette die which I will use to do the neck sizing. Trying to keep my neck tension as light as possible. I'm aware the length to the top of the shoulder or bottom of the neck...

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,440
Messages
2,195,982
Members
78,918
Latest member
Blassiter

Share This Page

Back
Top