Search results

  1. Sierra 69 Blitzkings

    No but the ELD-VT has a huge void in the nose that makes it go splat ! And a really good BC

  2. Injury Caused by Powder Mistake -- 28.5 gr of Lever Evolution VS 28.5 gr LiL Gun

    You look good for being 80 ! Were you wearing any type of glasses ? Thanks for posting this, I think I will clean up my bench a bit.

  3. You done messed up A A-ron!

    I would have vacuumed off the top layer but it sounds like you already mixed up the jug.

  4. Which sizing die for 22BR Norma

    I have a Redding FL sizing die that I feel over sizes the neck, a .239" pin gauge will fit thru it but a .240" will not. When my Lapua brass has been sized I can get a .216 pin gauge about a quarter of the way in neck so it is way oversized but the FL die sizes the neck further down than my...

  5. 22 BR Brass - Peterson, Alpha, or Lapua?

    I am processing 2,000 Lapua cases and have uniformed the flash holes on 1,000 cases with the K&M and there is barely a speck of brass on my mat so I would say they are pretty uniform. And I have 11 extra cases after putting them in reloading block so they thru in some freebies !

  6. Homebrew Penetrating Oil - Removing Factory Barrel

  7. CA ammo purchase background checks unconstitutional!

    The 9th circuit get overturned nearly 80% of the time. They will probably appeal their own ruling. Since 2007, the Sixth Circuit had a reversal rate of 80.7 percent. That is the highest reversal rate, followed by the Ninth Circuit with a 79 percent reversal rate.

  8. Reloading Components in Stock -- Running Topic

    Very pricey Reloder 23 at Midway $86/lb and a whopping $510 for the 8 pounder !!

  9. This Rifle won't Shoot! Diagnosing the issue(s).

    Have you checked the twist to see that it is indeed the rate it is claimed to be ? Just mark a cleaning rod and see how far it goes down the barrel to make a 360 degree twist.

  10. Want to Buy 30 Herrett Dies

    https://www.ebay.com/sch/i.html?_nkw=30+herrett+dies&_sacat=0&_from=R40&_trksid=p4432023.m570.l1313

  11. Die that doesn't touch the shoulder?

    Cut the top off the die and you won't have a shoulder bump. If you need more sizing grind the bottom of the die off until it sizes to your dimension. Lee probably makes the cheapest die.

  12. Savage Barrel Removal

    The last one I took off had the smooth factory nut and it stuck on the barrel after I removed it from the action. I had to heat it up to get the thread locker to release and it also has blasting media in the threads. Remember to recheck the headspace after tightening the nut as it can change...

  13. What the hell happened -- Case pressure???

    One thing to remember is that the temp stability rating is not linear. While Varget shows 0.13 FPS/degree this may hold from 40F to 85F but above 85F it can increase much more which is probably what you experienced. Most powders seem to increase speed around the mid 80's.

  14. WANTED Rem 700 SA RH Target/ Benchrest Stock

    Short action 700 clone right hand, 3'' wide maximum at the for arm Thanks !

  15. 20 ppc loads

    https://forum.accurateshooter.com/threads/20-ppc-powder-choice.4077822/...

  16. Squib load...bullet stuck

    Send it to Remington and they will fix it up real good for you !

  17. Coyote on the rocks

    HAHA, he got tricked !

  18. Brushed Firing Pin

    Paul at Pro Precision does excellent work and quick turn around time for bolt bushing. https://boltfluting.com/index.html https://forum.accurateshooter.com/threads/shout-out-to-boltfluter.4153495/#post-39224379

  19. A little night-time coon hunting.

    Yes, nice looking fur.

  20. Shout out to Boltfluter!

    https://boltfluting.com/

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
167,134
Messages
2,227,701
Members
80,226
Latest member
Kelp

Share This Page

Back
Top