Search results

  1. Sling Swivel Stud Screw

    Thanks Dan

  2. Sling Swivel Stud Screw

    Does anyone know the size and thread of a standard front sling swivel stud? I have one in a Remington BDL walnut stock that has stripped out in the wood and want to make an aluminum insert into the stock to fix it. Thanks

  3. Winchester Model 70 Firing Pin Replacement

    Thanks again. I will give it a try this weekend.

  4. Winchester Model 70 Firing Pin Replacement

    Thank you for taking the time to type that out. I will give it a shot. I plan to re-use the factory cocking piece. Should i expect any problems with that? Thanks again for your reply.

  5. Winchester Model 70 Firing Pin Replacement

    I recently purchased a Tubbs Speedlock firing pin for my model 70 long action and have not installed one before. Could anyone with experience please give me some instructions for removing my factory firing pin for replacement? Thanks for your help.

  6. Checking a Chronograph

    I would try the two you have together first. Line them up back to back and shoot through both at once. If the read differently, then find someone who has a good chronograph to see if one or both of yours are bad. If they both read the same, id say you are ok.

  7. Has your barrel tuner changed horizontal dispersion?

    I have just read through this thread and am becoming interested in trying a tuner on one of my rifles. It would either be on a remington varmint contour in 243ai or an hv contour in 7 Dakota. Which model tuner would you guys recommend? Also, thank you all for posting such good information based...

  8. Company name

    I believe the company is Tubbs

  9. .204 39gr blitz king load data

    26.5gr AA 2230 39gr Blitzking Fed 205m Hornady brass Savage VLP 3850fps

  10. what am i doing wrong? full length sizing question

    I have seen this exact thing happen before and it turned out to be flex in the press. It was an old Herter's press.

  11. .20 Berger VLD bullet question

    No, they are not a vld. They are a hollow point flat base.

  12. Fireforming/neck turning

    I meant to say COW method of fireforming.

  13. Fireforming/neck turning

    When using the COW to fireform for a tight neck ackley chamber, is it best to neck turn before or after fireforming?

  14. 243AI on Short Action

    Thanks for the replies. The Wyatt's box looks like a pretty good fix.

  15. 243AI on Short Action

    I have a 700 sa bdl that i am wanting to re-barrel to 243AI. Does anyone know how well i can expect a loaded round with 107 smk's to work in the factory magazine? Thanks,

  16. Redding 'S' Type dies stretching too much of case?

    Sounds like you have a Type-S full length bushing die when you were expecting a Type-S neck die. They both use a bushing which only sizes part of the neck but the full length die sizes the rest of the case as well

  17. Nightforce Battery

    Thanks guys. Does the NXS use the same battery?

  18. Nightforce Battery

    I bought a used NF benchrest scope that does not have a battery. Can anyone tell me the type of battery that the br scopes require? Thanks

  19. Custom Die Question

    I would like to have a custom Wilson seating die cut for a 7mm Dakota. Can a seating die be cut from the same reamer that cut the chamber? I have the reamer that cut my chamber and can get a Wilson seater blank. If possible, does anyone have any suggestions on who to send it to? Thanks, agr516

  20. Longshot - barrel for Browning A5?

    I have been in the same boat. You may be lucky enough to find one with standard invector chokes but it is no certainty. Finding one with invector plus tubes is nearly impossible. I ended up buying a Hastings barrel on Gunbroker after a few months of looking but even that was hard to find.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
166,994
Messages
2,226,100
Members
80,084
Latest member
H3NN13

Share This Page

Back
Top