Search results

  1. shooting 6.5 Creedmoor out of a .308 barrel

    My 6.5 Creedmoor ammo will fire in my 308 rifle.
  2. Used Mark 7

    I honestly have no idea if that is a good price, but I checked Brownells and Midway and new they are priced around $2900.
  3. Revolver brass shrinking??

    Very odd. I never measure or trim straight wall handgun brass. I use a taper crimp which is a little more forgiving on case length.
  4. Question on scratch towards the end of crown

    Check out a Savage barrel some time. I have had a couple that had so much tool marking that it looked like a railroad track running down the bore. They still shot pretty well. Maybe just mention it to the people you got it from, then shoot a couple hundred rounds to get it up to speed and...
  5. 600 + yard ranges, where?

    Not as nice as what you have, but I just extended my range to 600 yds. It is on my woodlot so not open like you have, but it is mine, so no lines, no other people, always open and uncrowded. It is in Maine, so winter shooting is a challenge, but I'll take it.
  6. What You Should Understand Before Buying A Gun Safe

    Right! A 24 gun safe will hold 24 single barrel break down shotguns IF you remove the shelves!
  7. Cheap fun

    I recently bought a used Rem 700 ADL in 223. Replaced the trigger and floated the barrel, other than that completely original, including the plastic stock. It is not even bedded. Worked up a load with CFE 223 and 52 gn Barnes Match Burners that will shoot 1/2 MOA consistently. I could not be...
  8. .223 Lapua brass

    Especially with free shipping! I ordered 200.
  9. .223 Lapua brass

    Thank you! I will check that out!
  10. .223 Lapua brass

    I have not been able to find any Lapua brass in .223 Rem. So I am looking for options. Lapua ammo is available at around a $1. per round. Would this be the same quality as the brass that they sell for reloading?
  11. Where can I find some RL-15.5

    Midway has it in both 1# and 8# jugs.
  12. Welcome to the Reloading Forum -- Introduce Yourself

    Welcome back to reloading and welcome to the forum!
  13. Target Backers

    I use scrap pine boards. The individual boards that are worn out can be replaced without replacing the whole backer. Mine are placed between vertical rails so they don't require fasteners.
  14. Welcome to the Reloading Forum -- Introduce Yourself

    Welcome! You should be able to get plenty of good advice here. And maybe some bad advice also!
  15. 6.5 Creedmoor Barrel Length

    LOL! Right! The Creedmoor in a tight group with your rounds out around the edges!
  16. 6.5 Creedmoor Barrel Length

    I am ready for a new barrel on my Savage model 10. It is in an Ashbury Precision Ordnance Saber chassis. I am limited to 600 yds, have an inventory of 147 ELD's, and H4350, Varget & RL16, I assume 8 twist and 24" length is what I should be looking at, but would consider other suggestions. Is...
  17. Headspace question

    One way to get the case head to datum point on shoulder is to close the bolt on an empty case with a spent primer that is just started into the primer pocket. The bolt will seat the primer and you can measure the dimension from the partially seated primer to the datum point with your Hornady...
  18. Any 7-08 fans?

    I do have a strong interest. I have a browning x bolt in 7-08 that I have been playing with but hard to find good bullets in anything under 175 gn. The rifle is a sporting model so I am thinking about putting a new stock and barrel on it and seeing what I can do with it. I also have a Rem 700...
  19. Any 7-08 fans?

    Any comments on 7mm-08 as a precision rifle?
  20. Barnes 145 gn Match Burner 6.5

    Thanks, but I have some of those. Was hoping to get some input on the 145 gn.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,958
Messages
2,225,822
Members
80,084
Latest member
H3NN13
Back
Top