Search results

  1. 6MMsteve

    Precision Air Rifles

    I have been shooting my Benjamin Trail last couple days I must have gained some strength not as bad to break down these days...it was a monster when I first started
  2. 6MMsteve

    What is a 6 Burn?

    top of your footzies when u go beach bummin and forget the sunscreen bad day
  3. 6MMsteve

    6mm Cartridge

    6xc for the win shoots 85 gr hpbt great, easy button and a little extra for the long shots...a plain criterion barrel will shoot well, I have 4 various barrels they all shoot .1s to .3's shoots the 85 gr smks in the .1's boring and the 110 smks bugholes also
  4. 6MMsteve

    H4350 OBSESSION?

    I use n555 and 160 and some 550 get great results in my 260's
  5. 6MMsteve

    Who has 277 Fury load data.

    Earl Chronister steel heads he gave my brother 5 cases in 300 whby he shot those things forever...but the steel head screwed into the brass
  6. 6MMsteve

    Which case neck chamfering tools work best for you?

    I put a heavy outside chamfer on my cases almost rounded, I use all no turn nks in barrels but that's just how I do it...you cannot feel a burr just smooth outside...I never have to touch up never no worries
  7. 6MMsteve

    Nightforce competition 15/55

    set diopter once never touch again right that's my motto
  8. 6MMsteve

    Nightforce competition 15/55

    use single vision glasses no bifocals if you have a older pair of single vision glasses try those I have to screw the dioptor almost all the way back to get a good CH that's sharp, but it works with an older pair of glasses I sent scopes back for 2 yrs till I tried the older glasses it was all...
  9. 6MMsteve

    McGowen Rifle bbls

    I had a 220 Swift McGowen Barrel that shot good slayed a bunch of ground hogs with it
  10. 6MMsteve

    MY 25 X 47 LAPUA ODCR CUSTOM BUILD & LOAD WORK-UP

    Great post Bill :)
  11. 6MMsteve

    22 Creedmoor Powder advice

    N550 should get the job done
  12. 6MMsteve

    primers

    Prime rib burgers are great been getting them from the store man they is good...have a great day hope you get the issue fixed, jam as tight as you can it might work out.. keeping fingers crossed
  13. 6MMsteve

    primers

    Seat bullets out to engage grooves, your fireforming I presume, seat bullets and get a good feel on bolt close a tad tight, the primer is coming out and then brass hits boltface I think primer is flowing around FP I could be altogether wrong... I would seat bullets out but just make sure...
  14. 6MMsteve

    338LM Peterson brass, primer pocket!?

    can chamfer a tad yes a rcbs tool will make a wider chamfer and the lymans have diff angles do some experimentation and find a cure or maybe someone else has an easier idea, I use a chamfer toll for military brass
  15. 6MMsteve

    Heavy bolt lift causes

    Check your press if you use one, for anything loose, set screws and such...I had a mess of a Frankford Arsenal press...I love the press but it had some loose set screws and gave my brain discomfort
  16. 6MMsteve

    Stolen At East-West Match

    I would bet yes someone misread the sign and just seen free...I'm guilty of poor comprehension just low IQ
  17. 6MMsteve

    Stolen At East-West Match

    see if any cameras were around at the shoot, u might see something that blows your mind
  18. 6MMsteve

    Rifle scope leveling wedges

    angled parallels will work with a Jo Block
  19. 6MMsteve

    Loads for N560 with 6XC or 6.5CM

    N550 also
  20. 6MMsteve

    Loads for N560 with 6XC or 6.5CM

    I shoot N555 in my 6xc, 260, 260AI, 65x284 6 creedmeer, they all shoot good it's a great medium powder

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
166,810
Messages
2,223,515
Members
79,917
Latest member
Joe The Licensed Plumber

Share This Page

Back
Top