Search results

  1. Nightforce NXS Proprietary Threads - Anyone have info?

    I would love to be able to put a butler creek on the eyepiece of my NXS but I cannot stand the thing turning side to side as I adjust my power up and down. Highly aggravating.

  2. cheapest accurate out of the box 204?

    Don't look any farther than the VLP that you already have in mind. I have one and have been impressed with its accuracy since I fired the first break in shots.

  3. Thanks To Berger For The Present

    Absolutely. Good to see a company who has all the demand in the world to sell their products think enough of their customers to give them something back to show their appreciation. Well done , Berger.

  4. 6XC feeding issue in BDL

    Thanks for the tips. I will shop around for different followers. I really would like to make it feed correctly.

  5. 6XC feeding issue in BDL

    Isn't the 308 and 22-250 follower piece the same? I also forgot to mention that my 243AI has a Wyatt's extended magazine box.

  6. 6XC feeding issue in BDL

    I am hoping that someone has an easy solution to this as I am having the same problem with my BDL that was a 22-250 and is now a 243AI with a long COAL. Mine will do the exact same thing in that it fails to pop the cartridge completely out of the mag well. It can be fed (not great at all) with...

  7. First Coyote

    Resized Photo. Hope this works...

  8. First Coyote

    Saw this small coyote while groundhog hunting with a buddy of mine over the weekend. We had seen this one along with another run out of a field as we pulled in. We set up on a hilltop to see if maybe they would re-appear. Sure enough, after about 20 minutes or so, this one came walking out of...

  9. Too hot to hunt groundhogs

    I must be the only one who does all of my groundhog shooting from an air conditioned pickup.

  10. Wilson trim length inconsistency

    Thank you for the responses and links. I will do some testing and see if i can get it worked out. Thanks again, Agr516

  11. Wilson trim length inconsistency

    I have recently bought a new Wilson micrometer trimmer and am getting some inconsistent results. About one out of every five cases gets trimmed anywhere from 2-5 thousandths short. I have checked everything from the set screws on both the micrometer head and main screw adjustments to the nut on...

  12. What's your method in securing the action during glass bedding?

    The day before I plan to bed the action, I put a small dab of Devcon in the barrel channel a couple of inches from the tip of the forearm. This creates a perfectly contoured mold/cradle under the barrel in its original position and is much easier to me than doing the tape wrap thing. (Be sure to...

  13. Load data wanted for 243 AI/105 pills

    1. Hodgdon Retumbo Federal 215M primer Berger 105 Hybrid Lapua Brass 2. H4831 Federal 210M primer Berger 105 Hybrid Lapua Brass Both of these loads produce .25-.5 MOA from my 28" Krieger/Rem 700 SA

  14. Building Backstop ??

    It is not thickness that you need but hardness. I have a bullet deflector like what you describe that has a 1" thick plate of steel but it is turning out to be too soft. The steel is soft enough that as it accumulates craters, you begin to get splatter holes in your paper target as the bullets...

  15. Bushnell Range Finder

    Yes, thats the one. I use it for varmints (groundhogs) and golf flags. It does great with objects of that size.

  16. Bushnell Range Finder

    Exactly. But you wont cry long because you will have a new rangefinder to play with.

  17. Bushnell Range Finder

    I had the Elite 1500 ARC and sold it when I bought a Leica 1600. You can expect fair results from the Bushnell but do not expect great results, especially for varmint hunting. I had a hard time ranging smaller objects that did not have something large close by to use for approximation. I also...

  18. Greg Rodriguez

    How about a little respect for the families affected by this tragedy? There are many suffering from this, and some of you speculate worse than ladies under the hair dryer hood at the local salon. Scott Very true. That needed to be said.

  19. Rem 700 factory triggers

    If you apply a small amount of heat to the "goop" it easily scrapes out in one chunk with a pick or tiny flathead screwdriver.
View older results

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
166,583
Messages
2,221,494
Members
79,721
Latest member
TMA

Share This Page

Back
Top