What do you mean “behind the assembly area”? Do you mean firing line??
Dave
The layout of a High power rifle range typically has the targets at one end and the firing line on an elevated berm at a know distance from the target. 200-300-500-600-800-900-1000 yards are the most typical.
At each
Firing line, there is accommodation for shooters and scorers and line officials at the firing line and back about 10-20 yards behind the firing line. If you are not shooting scoring in this relay or a match official, you should not be in the firing line area.
During large matches with multiple relays ( more than 3) , there is a second area of about 20 yards behind the firing line that extends another 20 yards back called the
Ready Area. This is where the next shooter up will bring their gear up and wait to be called to the line by the RO/ center line tower talker calling the match.
Further behind the ready area is the
Assembly Area where most shooters will drop the majority of their gear, set up shades and chairs as to be far enough away from the firing line that all the chatter is not disrupting to the shooters and officials.
At Lodi, the range is flat enough and the ground firm enough people will drive their vehicles to a point behind the assembly area rather than use a cart to move gear between yard lines.
Shooters are assigned a
firing point ( Target number) and a
relay to shoot in by the Match director during
squadding. You will shoot on this target, in this relay all day. It may change from day to day in a multi day match.
In large matches with 5-6 relays and pits there is usually a master schedule that indicates the order for who shoots who scores, who is in the pits for each stage of a match based upon your relay.
You may hear some one say "Relay five and six to the pits, Relay number three, take your position as scorer Relay #1 move your equipment to the line. "
In this case Relay 2 is getting ready to shoot next and relay 4 is hanging out in the assembly area.
E targets eliminate the pits and the time needed to move people in and out of the pits and back to the firing area but you have to listen to Center line official to know what your relay is supposed to do. this puts more people in the Assembly area and this is where the BS'ing will occur... I do miss some of the stories coming from the pits though...