• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

3 powders for 308win

I duplicated the Match round using 4895 for a Savage Model 10 Police Rifle
IMR 4895 or H4895
W748
IMR 4064
Mainly because that is what I have.
 
Recently did load development for a vintage sniper in 308 It is a bolt gun
I tested N140, Varget and RL15 I think they all shot about the same I went with Varget
 
WOW good choices guys, I have most of these powders, I will ask a question, I have a new Zastava M77 in 308win and I have a bunch of Seirra 155gn Palma Match kings, the barrel is a 1/12 twist what are your thoughts? not to hijack the thread sorry!
 
WOW good choices guys, I have most of these powders, I will ask a question, I have a new Zastava M77 in 308win and I have a bunch of Seirra 155gn Palma Match kings, the barrel is a 1/12 twist what are your thoughts? not to hijack the thread sorry!
If you mean will you be able to use those bullets? Yes
If you like the above powders, you can find a 308 Service Rifle section on the Hodgdon site with better starting points for this rig.
On the other hand, I probably don't need to tell you that is not a precision rig so you could just feed it inexpensive 150 FMJ bullets and go have fun.

1722544954190.png
 
WOW good choices guys, I have most of these powders, I will ask a question, I have a new Zastava M77 in 308win and I have a bunch of Seirra 155gn Palma Match kings, the barrel is a 1/12 twist what are your thoughts? not to hijack the thread sorry!
I've found N140 to be very accurate with 155gr bullets.
 
IMR 4064 or Varget (saw no difference in my 308's both outstanding)
IMR 4895 or H 4895 but good luck trying to find the latter.
 
Thanks for the replies, I have not fired this M77 PAP yet, I know it's not a precision rifle, but I want to get all the accuracy out of it that I can, I thought that with 1&12 twist that maybe the longer barring surface of the 155gn PALMAS might work better? I have several test loads ready with a few different powders like SWMR, A2495, A2460, A2520, I want to load up some VARGET next, I have heard that folks are getting good results with VARGET, I'm also running 147gn FMJ, and the 155gn SPMK's in these loads,
 
Varget
8208XBR
Viht N140
Broad range of load applications.
When Varget was not available, I was using N140 grian for grain.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
170,013
Messages
2,285,978
Members
82,485
Latest member
porrick
Back
Top