• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Couple more LRB 2.0s finished up.

Alex Wheeler

Alex Wheeler

Site $$ Sponsor
Finished up these two today. They are basically twins. Bat B dual ports, one is CM, one SS. Both got the actions and ignitions tuned, fitted a shroud to the one with the roller cp. Both Have Bartlien barrels in 6BRA#1 .268. Both have tuned Bix n Andys with carbide bearings. Both are glued and screwed into laminate LBR 2.0 stocks. The green one happens to be mine.
DSC_0296.JPGDSC_0297.JPGDSC_0299.JPGDSC_0301.JPGDSC_0302.JPG
 
Alex Wheeler said:
Finished up these two today. They are basically twins. Bat B dual ports, one is CM, one SS. Both got the actions and ignitions tuned, fitted a shroud to the one with the roller cp. Both Have Bartlien barrels in 6BRA#1 .268. Both have tuned Bix n Andys with carbide bearings. Both are glued and screwed into laminate LBR 2.0 stocks. The green one happens to be mine.
View attachment 1491455View attachment 1491456View attachment 1491457View attachment 1491459View attachment 1491460
Click to expand...
beautiful work.
 
OMG... those are a beautiful pair. You are the man Mr. Wheeler! I have a sneaky suspicion those 103 RHAW's you have been making may do the trick. Super excited Alex and thanks for all of your work and dedication to this fine sport. Now, let's make em spin..
 
ebb said:
Why did you opt for the chrome moly action?
Click to expand...
Thats kind of a long story. I have measured a lot of actions for straightness. I found the cm to stay straighter through the manufacturing process. I have done some pressure testing and didnt see much there. The surface finish or smoothness seems better with cm. However since Bat has implemented a new process, I dont see much difference in any of that. But I tend to stick with it.
 
Alex Wheeler said:
Thats kind of a long story. I have measured a lot of actions for straightness. I found the cm to stay straighter through the manufacturing process. I have done some pressure testing and didnt see much there. The surface finish or smoothness seems better with cm. However since Bat has implemented a new process, I dont see much difference in any of that. But I tend to stick with it.
Click to expand...
I'm curious how much difference you see on average and your process to verify. Thanks Alex!
 
You must log in or register to reply here.

Similar threads

Alex Wheeler
Another LRB light gun build.
2
Replies
29
Views
2,280
bozo699
bozo699
Alex Wheeler
6PPC Build.
Replies
7
Views
777
D Coots
Alex Wheeler
1000yd Switch Barrel LRB Heavy Gun Build.
Replies
15
Views
1,400
newbieshooter

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
167,128
Messages
2,227,793
Members
80,235
Latest member
pelicanarms

Share This Page

Back
Top