• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

How Peterson Cartridge Company decides on new cartridge brass

Pretty bizarre marketing strategy! Ignore the most asked for cartridge with lots of pent up demand.

Ya'll waisting your time with this thread. They make good brass. They will make what they choose to make. What anyone on here wants or thinks don't count for $hit. Such is life..
 
Pretty bizarre marketing strategy! Ignore the most asked for cartridge with lots of pent up demand.

We are not ignoring them by any means. Right now we are so backed with orders for current caliber and even have large orders for some calibers we are still developing. Our production schedule is planned all the way through the first quarter of 2021 with all our equipment running 24/7. We want to make the WSM's, SAUM's, PRC's, RUM's, and every other caliber that is in high demand. its finding the time to do the development for all the tooling. Only so many hours in a day. I am sure you can understand that we can not turn down work and orders on current calibers. There is no doubt in my mind that we will eventually come out with these calibers i just don't know when. I personally would like to see both the .300 WSM and the 6.5 PRC.

Before anyone says anything about some of the new ones that have been released over the past year. The only reason that we made them was due to very large orders for them. We do apologize and sympathize with all of you. We are trying our best to meet the market demand. We are happy to answer any questions you all have. Hope everyone has a great day,
 
We are not ignoring them by any means. Right now we are so backed with orders for current caliber and even have large orders for some calibers we are still developing. Our production schedule is planned all the way through the first quarter of 2021 with all our equipment running 24/7. We want to make the WSM's, SAUM's, PRC's, RUM's, and every other caliber that is in high demand. its finding the time to do the development for all the tooling. Only so many hours in a day. I am sure you can understand that we can not turn down work and orders on current calibers. There is no doubt in my mind that we will eventually come out with these calibers i just don't know when. I personally would like to see both the .300 WSM and the 6.5 PRC.

Before anyone says anything about some of the new ones that have been released over the past year. The only reason that we made them was due to very large orders for them. We do apologize and sympathize with all of you. We are trying our best to meet the market demand. We are happy to answer any questions you all have. Hope everyone has a great day,

Hopefully business continues to boom well enough for you guys to invest in some additional tooling/machinery to keep up with demand, but give you a bit of time to develop new calibres. As you have seen by now, there's quite a few serious competitive shooters on here who would gobble up 300wsm, and we're just the guys who are keen competitors...throw the hunting market into the mix and I'm sure you'll have no trouble selling what you make because it's quality.
 
Hopefully business continues to boom well enough for you guys to invest in some additional tooling/machinery to keep up with demand, but give you a bit of time to develop new calibres. As you have seen by now, there's quite a few serious competitive shooters on here who would gobble up 300wsm, and we're just the guys who are keen competitors...throw the hunting market into the mix and I'm sure you'll have no trouble selling what you make because it's quality.

In the last year we have doubled our machinery because of demand and we are to the point now where we can not keep up and looking to add even more machines. Our hopes are to add another "cell". We have 2 now and a 3rd would up the output tremendously. There is not doubt that we would sell a ton of the WSM's!! We will get there at some point. For being such a young company, only been in business 5 years. We have come along way with our offerings and still have a long way to go. We appreciate all the market support and the support of all the shooter.
 
Is 6.5 Grendel and 6ppc brass on your business radar in the next 2-3years?? Thanks for producing this in the USA. WD

We learned awhile ago not to mention what calibers we are planning on until we have actually produced them and have the tooling. We made that mistake at Shot Show a few years back with the .300 WSM and are still paying the price for that. I don't want to say yes and be held to that answer. I am sure you can understand that.
 
We learned awhile ago not to mention what calibers we are planning on until we have actually produced them and have the tooling. We made that mistake at Shot Show a few years back with the .300 WSM and are still paying the price for that. I don't want to say yes and be held to that answer. I am sure you can understand that.

Yep! Completely understand. Especially on an open forum like this. But I still just had to ask in hopes of something to look forward to. It's been a hell of a year. ;):) WD
 
In the last year we have doubled our machinery because of demand and we are to the point now where we can not keep up and looking to add even more machines. Our hopes are to add another "cell". We have 2 now and a 3rd would up the output tremendously. There is not doubt that we would sell a ton of the WSM's!! We will get there at some point. For being such a young company, only been in business 5 years. We have come along way with our offerings and still have a long way to go. We appreciate all the market support and the support of all the shooter.

wow, good sign for the industry, this is impressive, congrats
 
Even in bad times, there is a sustaining demand for high quality goods and services.

What is the next cartridge that you will release?
 
Even in bad times, there is a sustaining demand for high quality goods and services.

What is the next cartridge that you will release?
When I was in business for myself years ago I was told this and I never forgot it(quality creates its own demand)
 
When I was in business for myself years ago I was told this and I never forgot it(quality creates its own demand)

Every time some board of directors somewhere promotes an accountant to CEO they should force said accountant to write this out 10,000 times in a stack of notebooks before taking over.
 
In the last year we have doubled our machinery because of demand and we are to the point now where we can not keep up and looking to add even more machines. Our hopes are to add another "cell". We have 2 now and a 3rd would up the output tremendously. There is not doubt that we would sell a ton of the WSM's!! We will get there at some point. For being such a young company, only been in business 5 years. We have come along way with our offerings and still have a long way to go. We appreciate all the market support and the support of all the shooter.

Copy that PCC, just do us a favor and don't sacrifice quality for quantity - your quality is what sets you apart and that's what the discerning shooter is looking for.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,870
Messages
2,205,383
Members
79,189
Latest member
Kydama1337
Back
Top