I need a Custom Stock Painter!

[PainterJohn]

Any body have a referral for a great stock painter?

 

[vahena]

Have you thought about Hydro dipping, they have thousand of different prints and its very durable, with clear coat on top.

 

[RustyMetal]

Why not buy a rifle skin/wrap thing? I just bought a roll of the 3m vinyl for about $15 IIRC thru Amazon. If you get the pre-cut AR-15/10 type you can spend $65 plus plus plus. I thought I'd try the Moss Oak Brand I think it was, in tape form for a plastic stock bolt rifle. Do some searching on Amazon and you might find something you like.

 

[Codeman]

David Tidwell with Dallas airbrush
www.dallasairbrush.com

 

[Jr Rigsby]

Any body have a referral for a great stock painter?

Josh Lemon. 615-939-0058. joshlemon.com

 

[Kurz]

Jeremy Holmes was the top of the heap a few years ago but I can't find any information for him today. Used to be Dimensions by Jeromy Holmes.

https://www.facebook.com/CustomGunCoatings

https://custompaintedgunstocks.com/

http://forum.accurateshooter.com/threads/official-gun-pix-pride-joy-thread.2990828/
http://forum.accurateshooter.com/threads/official-gun-pix-pride-joy-thread.2990828/
There are lots of painters mentioned in this thread from the forums but you have to look at the suggestions.

http://madshadowcustompaint.com/

 

[Jarhead6870]

Branden at "Custom Gun Coatings": http://customguncoatings.com/

 

[JRS]

Tom Meredith of ™ Stock-works fame

 

[SDDasher]

Charley Santoni at CS Sports http://riflestockpainting.com/Photo_Album.html
(530) 219-6479
charley@riflestockpainting.com

Contact Dixie Precision Rifles on face book. Robbie does some of the best custom painting of stocks you will hope to find.

 

[XXPER]

John check out this on you tube (Wisconsin Hydrographics Thermochromic Demonstration.) The stock in the video is mine and changes from black with water drops to neon green with water drops. He is located in Howard Grove Wisonsin. His work is great , hope this helps. Jim

 

[DBLNUT]

Jason Heorning does all mine. PM me for his contact if you want it.

View attachment 1009646

What type is that stock?

 

[JimPag]

Tom Meredith of ™ Stock-works fame

+1

 

[357Mag]

Painter-

Howdy !

+3 on Tom Meredith


With regards,
357Mag

 

[Tempest]

JR at Thunder Flames.

615-972-9283
info@thunderflames.com

 

[gat]

Josh Lemon!!!! Does gorgeous work best I have seen! Did the Kelblys Stock featured at the shot show this year! I think it is on their webpage!

 

[PWS]

Charley Santoni at CS Sports http://riflestockpainting.com/Photo_Album.html
(530) 219-6479
charley@riflestockpainting.com

Please be cautious, do a quick search on this guy before using!

 

[JimPag]

Tom Meredith of ™ Stock-works fame

I'll agree. Tom stripped, lengthened, added pillars, painted, built a new butt plate and glued & screwed a Speedy stock and his paint jobs are impeccable. There isn't one blemish or paint run. Best bedding job I have ever seen.

 

[butchlambert]

Charley Santoni at CS Sports http://riflestockpainting.com/Photo_Album.html
(530) 219-6479
charley@riflestockpainting.com

You have a PM.

 

[butchlambert]

Please be cautious, do a quick search on this guy before using!

I've used Charlie for a few rifles, but he might be having some kind of problems.
http://forums.accuratereloading.com/eve/forums/a/tpc/f/7971019521/m/9141038642

 

[6.5x47]

Am using Mike lavallee @ killerpaint.com