Conquest V4 6-24x50

[Gary O'Neal]

Any one had the chance to play with one of these yet?

 

[JaoeyP]

I have a sample. Haven't mounted it to a rifle yet. I have mounted a 4-16x44 and used it. Great optics for the money. I love the zero stop Zeiss is using on the V6 and V4.

 

[Gary O'Neal]

Thanks, JaoeyP

 

[CoyoteTan]

I love the zero stop Zeiss is using on the V6 and V4.

What's the difference between zeiss zero stop and others zero stop?

 

[JaoeyP]

I haven't used a ton of other scopes with zero stop, but I've had to take my manual with me every time I've adjusted them. The first time I adjusted the Zeiss, it was a no-brainer thereafter. Zeiss has the turret, you loosen two set screws to remove, then an internal turret barrel with a cam and stop, loosen two set screws to remove that. Then just rotate the turret stem until you've zeroed your elevation. Put the turret barrel back on with the cam against the stop and tighten the set screws, place the turret back on, line up the zero and tighten the screws. You can download the V6 manual from the Zeiss website. Here are a few screenshots.

 

[CoyoteTan]

It's just like the NF zero stop on their nsx line.

 

[JaoeyP]

It's just like the NF zero stop on their nsx line.

They are similar. A few less screws to loosen/tighten on the Zeiss zero stop, and to me it's a bit simpler design.