• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Torquing a mauser barrel, Inner C ring or face?

Stan Taylor said:
Here you go gat I hope the picture is good enough for you to see the shank OD is 1.040 a regular 98 large ring thread won't even start in this action.
Click to expand...


Stan, gat may have chambered a 100 or so of them, but he hasn't seen the Winslow FN. gat, Stan probably chambers more barrels in a year than most volume gunsmiths do in a lifetime.
 
butchlambert said:
Stan, gat may have chambered a 100 or so of them, but he hasn't seen the Winslow FN. gat, Stan probably chambers more barrels in a year than most volume gunsmiths do in a lifetime.
Click to expand...
Butch I am not arguing at all just intrigued! I myself have been barreling 25+ years and guess I have never seen a Winslow FN! I thought I had barreled every iteration of large and small rings out there! Guess that goes to show ya that when you think you have seen it all..... I wish I had only barreled a 100 or so that would make me a lot younger...... Tomorrow is my birthday and it seems like birthdays come around weekly now!!Stan Thanks for the pics even though I took you at your word.
 
gat said:
Butch I am not arguing at all just intrigued! I myself have been barreling 25+ years and guess I have never seen a Winslow FN! I thought I had barreled every iteration of large and small rings out there! Guess that goes to show ya that when you think you have seen it all..... I wish I had only barreled a 100 or so that would make me a lot younger...... Tomorrow is my birthday and it seems like birthdays come around weekly now!!Stan Thanks for the pics even though I took you at your word.
Click to expand...


Not downplaying your longevity or experience, just saying that Stan has vast experience doing this and has seen things that most of us will never see.
Happy Birthday and I hope you have many more healthy ones.
 
butchlambert said:
Not downplaying your longevity or experience, just saying that Stan has vast experience doing this and has seen things that most of us will never see.
Happy Birthday and I hope you have many more healthy ones.
Click to expand...
+1 on the seen more statement! Thanks Butch!
 
20180226_104714-1.jpg
gat said:
Butch I am not arguing at all just intrigued! I myself have been barreling 25+ years and guess I have never seen a Winslow FN! I thought I had barreled every iteration of large and small rings out there! Guess that goes to show ya that when you think you have seen it all..... I wish I had only barreled o20180226_104714-1.jpg a 100 or so that would make me a lot younger...... Tomorrow is my birthday and it seems like birthdays come around weekly now!!Stan Thanks for the pics even though I took you at your word.
Click to expand...
Happy birthday young man an many more.PS let's see who all knows what these threads are what action.lol
 
Last edited:
20180226_104714-1.jpg
kendog said:
1-1/16" - 18 Nesika?? Or something mighty close. BAT?? The last Nesika Model L I did had a thick lug and boss on the tenon to match.
Click to expand...
No it isn't I ain't going to let the cat out of the bag yet.LOL PS your right on the OD it is 1.062 inches.
 
Last edited:
kendog said:
1-1/16 - 20? Maybe a late Winchester/FN controlled round push feed in WSSM flavor? I'm just guessing now. Thought I had it nailed with the BAT and already won the Buick!
Click to expand...
You are getting closer it's going to blow you away.Well I am not going to tease you any longer when I have a order going threw I write it up like this barrel in question is going on a new/old model 70 Winchester control round feed like pre-64 m70 with get this (1.062x28 threads per inch the new Browning A bolt is 32 threads per inch.
 
Last edited:
Stan Taylor said:
You are getting closer it's going to blow you away.Well I am not going to tease you any longer when I have a order going threw I write it up like this barrel in question is going on a new/old model 70 Winchester control round feed like pre-64 m70 with get this (1.062x28 threads per inch the new Browning A bolt is 32 threads per inch.
Click to expand...

Fun stuff. Keep them coming. On another forum we had a "name this wrench" thread going for a while. Stumped em with the Quad Lock RPA wrench.
 
I was thinking that looks finer then a 20 but not quit a 32.
Here is one to guess on.
 

Attachments

  • 20180226_115642.jpg
    20180226_115642.jpg
    274.8 KB · Views: 39
The rest of the pic actualy it is a Weatherby blank turned for the Browning with the barrel nut
 

Attachments

  • 20180226_121406.jpg
    20180226_121406.jpg
    852.3 KB · Views: 20
Cloudrepair said:
Would you please share why?
I have heard some stories but interested.
This one I got a deal on because someone had seized a boss on it and it was a mess:confused: I saved the barrel for some future use it was a 270 wsm
Click to expand...
Well I barreled one in a 300 win mag an test fired it an went to screw it off to caliber stamp it it turn about a .250 of an inch an locked up had to pay for an action an made decision it is not worth the liabilities.
 
Well gentleman I thought someone said they would like to see a picture of the threads an what I arrived at on that winslow FN action it was 1.040 ten on with 10 tpi.
 

Attachments

  • 20180228_143300.jpg
    20180228_143300.jpg
    117.6 KB · Views: 37
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,804
Messages
2,203,630
Members
79,130
Latest member
Jsawyer09

Share This Page

Back
Top