Sinclair Comp Rest Base Plates - Pre-Order Live

Discussion in 'Main Message Board' started by AlloyTargets, Feb 14, 2018.

  1. Roger Johnson

    Roger Johnson Gold $$ Contributor

    Joined:
    Apr 16, 2017
    Messages:
    24
    How is the Sinclair attached to your base? Count me in as a customer IF I can get BLACK powder coating or none at all. Alex built me a very accurate and totally Black BRA that would blend right into the black rest and base. Good luck with this project! RJ
     
  2. AlloyTargets

    AlloyTargets Site $$ Sponsor

    Joined:
    Feb 24, 2013
    Messages:
    730
    The 3 threaded holes in the factory base (for the legs and speed screw) are used to secure the plate. The plate has countersunk holes for 1/2-20 socket flat head screws, which I will supply.

    Noted on the color. Hope your enjoying your BRA.
     
  3. AlloyTargets

    AlloyTargets Site $$ Sponsor

    Joined:
    Feb 24, 2013
    Messages:
    730

    stacking won’t work. Everyone needs two of everything shooting related, stored in different places to mitigate risk.
     
    bpmoss1 likes this.
  4. Alex Wheeler

    Alex Wheeler Gold $$ Contributor

    Joined:
    Feb 5, 2011
    Messages:
    5,826
    So he can give me one for putting up with him:D
     
    bpmoss1 and Mulligan like this.
  5. Dusty Stevens

    Dusty Stevens COVFEFE Gold $$ Contributor

    Joined:
    May 8, 2014
    Messages:
    7,044
    Ive never seen one of those rests at a match do they still make em?
     
  6. Alex Wheeler

    Alex Wheeler Gold $$ Contributor

    Joined:
    Feb 5, 2011
    Messages:
    5,826
    The Sinclair? It the most popular around here. Joy sticks slow you down when the gun tracks perfectly.
     
    bpmoss1 likes this.
  7. Northridge

    Northridge

    Joined:
    Jun 4, 2014
    Messages:
    281
    I would take one for sure.

    Shawn Williams
     
    AlloyTargets and bpmoss1 like this.
  8. Jet

    Jet Gold $$ Contributor

    Joined:
    Apr 23, 2012
    Messages:
    755
    Put me down for one. Powder coat would be nice but will take one either way.

    Rich
     
    AlloyTargets and bpmoss1 like this.
  9. bpmoss1

    bpmoss1

    Joined:
    Mar 1, 2013
    Messages:
    250
    Don't know what's being used in short range br, but these are very popular in long range br. They benefit from a few modifications and this is just what the doctor ordered.
     
  10. WVHick

    WVHick Silver $$ Contributor

    Joined:
    Oct 16, 2017
    Messages:
    48
    I’d take one. I’d definitely want it powder coated to match the factory Sinclair if possible. I’m a function first guy, but looks are important to me :)
     
    AlloyTargets likes this.
  11. AlloyTargets

    AlloyTargets Site $$ Sponsor

    Joined:
    Feb 24, 2013
    Messages:
    730
    Guys have been asking about compatibility with other rests. The honest answer is, I don't know. I doubt there's any industry standardization. This one was designed around the Sinclair Comp only. Attached is a drawing of the Sinclair Comp base hole pattern that this plate was designed to fit. If yours has the same hole pattern and size, it should work (I guess???). The Sinclair Comp uses 1/2"-20 UNF holes for the feet and speed screw.

    If you have a Sinclair Comp and this is NOT the spacing, that would be good to hear. The two that we've measured have been on the $, but my sample is small...

    We are not set up to do 1 or 2 off customs efficiently. There may be other guys on the board that can help with a non-Sinclair rest, but it doesn't fit us well unless we can make 20-ish, all identical

    Thanks!
     

    Attached Files:

    'Freak, Mulligan and Alex Wheeler like this.
  12. urbanrifleman

    urbanrifleman Silver $$ Contributor

    Joined:
    May 25, 2016
    Messages:
    1,207
    It is quite nice. And your laser cutter is Niiiiccceeee!!!!
     
    AlloyTargets likes this.
  13. josh shrum

    josh shrum Gold $$ Contributor

    Joined:
    Mar 19, 2015
    Messages:
    290
    I need and will take all the help that I can get!
     
  14. nakneker

    nakneker Gold $$ Contributor

    Joined:
    Mar 5, 2013
    Messages:
    1,475
    Nice product. Looks like a lot of interest, including myself.
     
    AlloyTargets likes this.
  15. urbanrifleman

    urbanrifleman Silver $$ Contributor

    Joined:
    May 25, 2016
    Messages:
    1,207
    AlloyTargets likes this.
  16. C. Nichols

    C. Nichols

    Joined:
    Jan 3, 2016
    Messages:
    6
    I would be interested in one as well!
     
    AlloyTargets likes this.
  17. Wooten

    Wooten Romans 10:13 Gold $$ Contributor

    Joined:
    Feb 1, 2016
    Messages:
    29
    Count me in
     
    AlloyTargets likes this.
  18. retired

    retired

    Joined:
    Dec 17, 2017
    Messages:
    1,187
    ARE WE THERE YET ?
     
  19. retired

    retired

    Joined:
    Dec 17, 2017
    Messages:
    1,187
    how much longer on the front end ?
    in the middle of portable bench design..i may need to add an inch or two.
    thanks
     
  20. mikecockcroft

    mikecockcroft

    Joined:
    Aug 18, 2008
    Messages:
    551
    Should make Fly killing even easier
     
    AlloyTargets likes this.

Share This Page